Showing all 28 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Goosenecks +

Pole Diameter +

Pole Height +

8′ to 16′ Round Straight Aluminum Direct Burial

Spec Sheet

Specifications & Features

  • 8’ to 16’ mounting heights
  • For single or multiple luminaire mounting
  • Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
Shaft: Direct Embedment: Unless otherwise specified, the length of the embedded section of a 4” diameter is 3’, and a 5” shaft is 4’. A 1 1/2” diameter grometted wire inlet hole located 1’ 6” below grade is included. Ground Lug: The ground lug is a tab that is welded to the inside of the shaft, has a tapped 3/8” –16 hole to accommodate the ground connector, and is located opposite the hand hole or wire inlet hole. Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 4” is 2 1/2” x 5” and opening in the 5” diameter standard measures 3” x 5”. Anti-Rotation Device: Standard on all Direct Burial poles. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
  • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).

8′ to 30′ Round Tapered Aluminum Direct Burial

Spec Sheet

Specifications & Features

  • 8’ to 16’ mounting heights
  • For single or multiple luminaire mounting
  • Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
Shaft: Direct Embedment: Unless otherwise specified, the length of the embedded section of a 4”diameter is 3’, 5” and 6” shaft is 4’, and 7” and 8” shaft is 5’. A 1 1/2” diameter grometted wire inlet hole located 1’ 6” below grade is included. The embedded section of the standard is coated inside and outside with zinc-rich paint. Ground Lug: The ground lug is a tab that is welded to the inside of the shaft, has a tapped 3/8” –16 hole to accommodate the ground connector, and is located opposite the hand hole or wire inlet hole. Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 5” and 6” diameter standard measures 3” x 5”. The opening in the 7”, 8” and 10” diameter standard measures 4” x 6”. An optional 4” x 8” opening is available for 8” and 10” diameter standards. Anti-Rotation Device: Standard on all Direct Burial poles. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
  • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).

PLB 014

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 015

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" - 8' to 16' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 102

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 6’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 112

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" - 8' to 20' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 130

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" - 8' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 132

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 6’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 142

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 162

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 193

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 6’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 210

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 3” – 6’ to 12’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 220

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 6’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 261

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 3” – 6’ to 12’ Standard Heights
  • 4" - 6' to 14' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 371

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" - 10' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 381

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 402

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 412

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 413

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 414

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 416

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 20' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 418

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 20' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 420

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 10’ to 14’ Standard Heights
  • 5" -  10' to 20' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 512

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 612

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 672

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 16' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 676

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.

PLB 770

Spec Sheet Pole Options Wind Velocity Specifications & Features

  • 4” – 8’ to 14’ Standard Heights
  • 5" -  8' to 18' Standard Heights
  • Straight or tapered; Smooth or Fluted
Shaft: Smooth or fluted tubing uses 6065-T5 aluminum alloy. Tapered poles use 6061 aluminum alloy. Structural Base: A356 alloy sand cast aluminum, four bolt base. An extra-large access cover is included. A grounding lug is also provided. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes: Verde patina, pewter patina, silver sparkle, semi-gloss or matte black
  • Custom and Marine-grade finishes are available. All RAL colors are available to match.