Showing 1–100 of 160 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Goosenecks +

Pole Diameter +

Pole Height +

Argand

Spec Sheet IES Files Argand Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing with Top Glare Shield, Integral Heat Sinking and Driver Compartment. Laser Aiming Bracket is Provided on the Top of the Housing. Heavy Duty Adjustable Yoke Allows for Pole Downward and Ground/Wall Upward Aiming. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Gray Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded ¼-Section Vandal-Resistant Polycarbonate Lenses in NEMA 2x2, 3x3, 4x4, and 5x5 Distributions. 4 Lenses Per Fixture, with Automatically Applied Closed Cell Gasketing. Mounting Options: Heavy Duty Yoke Allows for Aiming Horizontally and Vertically. Locking Bolts Can Be Configured for Up or Down Aiming. Adjustment Slots are Stamped With Embossed 5 Degree Increment Marks. Fixture is Supplied With 36” Cord and Liquid Tight Connector to Allow for Installation Without Opening the Housing to Make Circuit Connections. Yoke Can Be Bolted to Sports Lighting Cross Arms or Other Structures. Optional Tenon Mount Adaptor Available. LED: Aluminum Boards Wattage: 268w: Array: 268w, System: 294w (Up to 1000w HID Equivalent) 536w: Array: 536w, System: 588w (Up to 1500w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Optional Factory-Installed 5-wire Cord with 1-10V Dimming Conductors are Internally Wired for Downstream Switching and/or 1-10V Dimming Within the Housing. Dimming Response is a Function of the Driver Capability, Consult Factory for Driver Specification for 1-10V Specific Characteristics. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Astro 1

Spec Sheet

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Housing: Aluminum housing with 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Astro 1 Pendant

Spec Sheet

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Housing: Aluminum housing with 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Astro 2

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Decorative cast aluminum capital with acrylic globe Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Basal

Spec Sheet

   

Specifications & Features

Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Basal Flood

Spec Sheet

 

Specifications & Features

Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Basal Wall

Spec Sheet

 

Specifications & Features

Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Bel Aire 35

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing & Front Frame, Integral Heat Sinking, Driver compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount with Two-Piece Swivel Bracket, Adjustable Slipfitter, Yoke, Mounting Arm Adaptor or Wall Mount Bracket. EasyLED LED: Aluminum Boards Wattage: 174w Array: 175.2w, System: 187w; (250-400w HID Equivalent) 262w Array: 262w, System: 286w; (400-1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Bel Aire 55

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing & Front Frame, Integral Heat Sinking, Driver compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount with Adjustable Slipfitter. (Factory Installed) EasyLED LED: Aluminum Boards Wattage: 348w Array: 348w, System: 385.7w; (1000-1500w HID Equivalent) 524w Array: 524w, System: 568w; (1000-1500w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Boca

Spec Sheet

Specifications & Features

Radiant LED: Conformal Coating LED light engine;  CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electronic: Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver;  Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: The housing is heavy cast aluminum, supporting solid aluminum support struts Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

Boca 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum housing with rings; Four uprights Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Boca 2

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum housing; Two uprights Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Bristol 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper housing & spun aluminum lower shade. The luminaire itself is held in place with a mechanical attachment & connected to the pole’s shaft with a cast aluminum hub fitter, welded to the arm & secured to the shaft with 3 set screws. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Bristol 2

Spec Sheet

Specifications & Features

Light Engine: Opti-FLUX LED, CCT: 27K, 3K, 4K, 5K Optical: Types III, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum spun shade with latch. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Calais

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (1800K), 22K 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Spun aluminum shades (optional). Includes leveler for pendant mount. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Cape May 1

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: This fixture’s housing is made of cast aluminum which holds the clear globe; available in either acrylic or polycarbonate. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Carlsbad 1

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 1 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 2

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 3

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

CAV 014

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 102

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 11 & 12

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat, Dome or Pyramid Tops, Internal Driver Tray for Easy Maintenance. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Reflector: Reflective White UV-Stabilized Polycarbonate Cone Reflector Lens: Clear UV-Stabilized Polycarbonate or SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens. Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: Array: 23w, System: 27w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -20°C to +40°C Environment.

CAV 112

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 130

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 13R & 13S

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mounting Base, Flat Top, Sealed Driver Compartment. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate or SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Inner Lens to Seal LED Array. Mounting Options: Mounting Kit with 8˝ Zinc-Plated Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: Array: 16.6w, System: 18.1w; (70w HID Equivalent) Array: 25w, System: 27.2w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Cav 13W & 14W

Spec Sheet

IES Files - Cav 13 IES Files - Cav 14

Specifications & Features

Housing: Die Cast Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Flat Top, Sealed Driver Compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Inner Lens to Seal LED Array. Mounting Options: Mount over a 4″ Recessed Outlet Box. Radiant™ LED: Aluminum Boards Wattage: Array: 16.6w, System: 20.2w (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60H; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +40°C Environment.

CAV 142

Spec Sheet

Specifications & Features

Radiant™ LED: Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 15

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat Top. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: 360° Light Distribution, 120° Shield or 180° Shield Lens: Clear Polycarbonate or LumaLens Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. Radiant LED: Aluminum Boards Wattage: 360° 17w Array: 16.6w, System: 18.9w 180° & 120° 16w Array: 15.5w, System: 18.5w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

CAV 15-W

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Sealed Driver Compartment. 360° Distribution, or 120° or 180° Shield. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Over a 4˝ Recessed Outlet Box. EasyLED LED: Aluminum Boards Wattage: 360° Arrays: 12w & 16.6w, System: 12.9w & 18.9w 180° & 120° Arrays: 10w & 15.5w, System: 11.2w & 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

CAV 16

Spec Sheet IES Files

LPS CAV 16 Spec Sheet LPS IES Files

Specifications & Features

Housing: Formed 316L Stainless Steel Housing with Flush Mounting Base & Vandal-Resistant Screws, Domed Top, Internal Ballast Tray for Easy Maintenance. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Style: Specially Designed Cone Reflector or Internal Louvers Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards CCT: 3000K, 4000K, 5000K and LPS Replacement PC Amber LED Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

CAV 17

Spec Sheet IES Files

LPS CAV 17 Spec Sheet LPS Cav 17 IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Domed Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: Clear Prismatic Borosilicate Glass Refractor, Specially Designed Cone Reflector or Internal Louvers Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards CCT: 3000K, 4000K, 5000K, LPS Replacement PC Amber Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

CAV 18

Spec Sheet IES Files

LPS CAV 18 Spec Sheet LPS IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: Clear Prismatic Borosilicate Glass Refractor, Specially Designed Cone Reflector or Internal Louvers Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards CCT: 3000K, 4000K, 5000K, LPS Replacement PC Amber LED Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

CAV 19

Spec Sheet IES Files

LPS CAV 19 Spec Sheet LPS IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: Clear Prismatic Borosilicate Glass Refractor, Specially Designed Cone Reflector or Internal Louvers Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards CCT: 3000K, 4000K, 5000K, LPS Replacement PC Amber LED Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

CAV 193

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200,  2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 220

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 371

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 381

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 4

Spec Sheet

Specifications & Features

Radiant LED: Conformal Coating LED light engine;  CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type I, II, III, IV, V Electrical Electric: Electric Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver;  Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Bottom section is extruded aluminum 8” round x .125 wall with internal sturdy aluminum base for anchor bolt mounting to foundation. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 402

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 412

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 416

Spec Sheet

Specifications & Features

Radiant™ LED: Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 460

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2000, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 512

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 52

Spec Sheet

Specifications & Features

Housing: Cast and Extruded Aluminum Housing with Flush Mounting Base, Flat Top. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Zinc-Plated Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: 18w: Array: 18w, System: 20.5w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

CAV 6

Spec Sheet IES Files

 

Specifications & Features

Radiant LED: Conformal Coating LED light engine;  CCT: 2700, 3000, 4000, 5000K Optical: Type I, II, III, IV, V Electrical Electric: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver;  Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: A heavy gauge cast aluminum dome secured to louvers with concealed tamper-proof stainless steel hardware. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 7

Spec Sheet IES File

Specifications & Features

Housing: Durable One-Piece Sand Cast Aluminum Housing Features ½" Thick Walls. Includes Flush Mounting Base & Vandal-Resistant Screws, Internal Driver Tray for Easy Maintenance. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens:Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options:Mounting Kit with 8˝ Zinc-Plated Anchor Bolts, Included EasyLED LED: Aluminum Boards Wattage:12w: Array 12w, System 13.6w; 18w: Array 18.2w, System 20.4w Driver:Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty:5-Year Warranty for -40°C to +50°C Environment.

CAV T51

Spec Sheet IES File

Specifications & Features

Housing: Extruded 12-foot Aluminum Housing with Flat Top and Die Cast Mounting Base. Includes PBR1 Decorative Clamshell Base Cover with Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Black or Platinum Powdercoat Finish Over a Chromate Conversion Coating. Lens: SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounts with Four M18 x 15˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: 24w Array: 23w, System: 25.1w; 36w Array: 34.5w, System: 37.6w; 48w Array: 46w, System: 48.9w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

CAV T52

Spec Sheet IES Files

 

Specifications & Features

Housing: Cast and Extruded Aluminum Housing with Flat Top and Die Cast Mounting Base. Optical Windows Can Be on the Same Side or at 180˚. Specify Orientation When Ordering. Includes PBR1 Decorative Clamshell Base Cover with Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lenses. Specify Orientation When Ordering (see Housing Description). Mounting Options: Mounts with Four M18 x 15˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: 18w: Array: 18w, System: 20.5w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

CAV15-D

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Sealed Driver Compartment. 360° Distribution, or 120° or 180° Shield. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Over a 4˝ Recessed Outlet Box. EasyLED LED: Aluminum Boards Wattage: 360° Arrays: 12w & 16.6w, System: 12.9w & 18.9w 180° & 120° Arrays: 10w & 15.5w, System: 11.2w & 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Chesapeake 44 16″ High Bay

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Includes 4″ Stem. Maximum Stem Length: 30 Feet Listing & Ratings: CSA: Listed for Damp Locations, ANSI/UL 1598, 8750 (Lens Gasket Use Required); IP65 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens, UV-Stabilized Polycarbonate Drop Lens, Acrylic Drop Lens, Acrylic Conical Lens. Mounting Options: Mount with Included ¾″ Die Cast Hook. EasyLED LED: Aluminum Boards Wattage: Array: 169w; System: 178.5w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Copper Path Lights

Spec Sheet

Housing: 7”, 9” or 11” Diameter Spun Copper shade with White Reflective Powdercoat Finish on the Underside. Adjustable Lampholder Housing with Clear Glass Lens. “No Tools Needed” entry for relamping. Includes 36” Cable with Wire Connector. Bright Polished Copper will age to a dark copper patina. Mounting Options: Choice of 19”, 31” or 37” Copper Stanchions (Included) LED Lamp (included): 2.5w 190 lumens 12v (requires Transformer, not included) 3000K or 4000K CCT 30,000+ Hours

Coronado 1/2

Spec Sheet

Specifications & Features

Light Engine: Opti-FLUX LED, CCT: 27K, 3K, 4K, 5K Optical: Types III & V (Opti-FLUX) Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged top entry housing is held in place with a stainless steel latch. The top includes a leveler for knuckle mounting. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Coronado 3/4

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged top entry housing is held in place with a stainless steel latch. The top includes a leveler for knuckle mounting. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Crest 12

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 15w, System: 15.8w; (150w HID Equivalent) Array: 21.7w, System: 23.7w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 15

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: 25w Array: 24.78w, System: 27.1w; (175w HID Equivalent) 37w Array: 37.2w, System: 40.6; (250w HID Equivalent) 50w Array: 50w, System: 54.2w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 20

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 37w, System: 40.6w; (250w HID Equivalent) Array: 55.8w, System: 60.9w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 34

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED Low Profile LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Included Easy-Hang Bracket Fits Standard 4" Electrical Box, Allowing One-Person Installation. EasyLED LED: Aluminum Boards Wattage: Array: 34w, System: 38.9w; (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 4kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 35

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. EasyLED LED: Aluminum Boards Wattage: Array: 46.5w, System: 52w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 36

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Meets Dark Sky Requirements. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. EasyLED LED: Aluminum Boards Wattage: Array: 46.5w, System: 52w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 44

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame, Integral Heat Sinking and Driver Compartment. Twist-Lock Photocell/Smart Controls Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded Type IV Polycarbonate Lens. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. Optional Trim Plate is Available for Use in Retrofit Applications to Cover Wall Surface Blemishes. EasyLED LED: Aluminum Boards Wattage: 25w: Array: 24.9w, System: 28.4w (100w HID Equivalent) 37w: Array: 37.3w, System: 41.8w (175w HID Equivalent) 81w: Array: 80.8w, System: 83.7w (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 25w, 6kV for 37 and 81w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Crest 45

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame, Integral Heat Sinking and Driver Compartment. Polycarbonate Vandal-Resistant Lens Area on Housing for Use with Microwave Sensors. Twist-Lock Photocell/Smart Controls Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded Type IV Polycarbonate Lens. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. Optional Trim Plate is Available for Use in Retrofit Applications to Cover Wall Surface Blemishes. LED: Aluminum Boards - +/- 300K per CCT Wattage: 81w: Array: 80.8w, System: 92.8w (175w HID Equivalent) 112w: Array: 111.9w, System: 131w (250w HID Equivalent) 174w: Array: 174.1w, System: 187.5w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, Dimmable Driver. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Danville

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K,  27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper dome & spun aluminum lower shade Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Delmar 30

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, Integral Heat Sinking. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Finish: Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Array Lens to Seal LED Array Mounting Options: Included Easy-Hang Bracket Fits Standard 4″ Electrical Box, Allowing One Person Installation. Radiant LED: Aluminum Boards Wattage: 37w Array: 37w, System: 39w; (70-150w HID Equivalent) 65w Array: 65.1w, System: 68w; (150-250w HID Equivalent) 84w Array: 84w, System: 86w; (150-250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Delmar 32

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, Integral Heat Sinking. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Finish: Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Array Lens to Seal LED Array Mounting Options: Included Easy-Hang Bracket Fits Standard 4″ Electrical Box, Allowing One Person installation. Radiant LED: Aluminum Boards Wattage: 100w Array: 100w, System: 108w; (150-250w HID Equivalent) 176w Array: 176w, System: 190w; (400-1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Delmar 34

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, ½˝ Coin Plugs with O-rings for Conduit & Photocell on Two Sides & Back, Nickel-Plated Stainless Steel Hardware Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. ADA Compliant. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED Low Profile LumaLens Opal Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit Radiant LED: Aluminum Boards Wattage: Array: 21.7w, System: 27w; (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Delmar 44

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, ½˝ Coin Plugs with O-rings for Conduit & Photocell on Three Sides & Back, Nickel-Plated Stainless Steel Hardware Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED Low Profile LumaLens Opal Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 45.4w, System: 53.7w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; or 347-480v, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Delmar 55

Spec Sheet IES Files

Specifications & Features

Housing: Low Profile Die Cast Aluminum Housing, ½” Coin Plugs with O-rings for Conduit or External Sensor. Built-in Sensor Housing with Color-Matched Polycarbonate Cover. A Clear Cover will be Provided When a Sensor is Ordered. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. (Damp Locations When Used with VNQM.); IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request Lens: Molded UV-Resistant Acrylic Optical Lens Designed for Garage Lighting Applications. Mounting Options: Included Easy-Hang Bracket Fits Standard 4” Electrical Box, Allowing One-Person Installation. Optional Quick-Mount/Pendant Bracket Available. Radiant™ LED: Aluminum Boards Wattage: 30w Array: 28; System: 30.5; (Up to 100w HID Equivalent) 37w Array: 37; System: 41; (Up to 100w HID Equivalent) 48w Array: 48.7; System: 53.9; (Up to 175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Delmar S40

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, ½" Coin Plugs with O-rings for Conduit or External Sensor. Built-in Sensor Housing with Color-Matched Polycarbonate Cover. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Molded UV-Resistant Polycarbonate Lens Optically Designed for Garage Lighting Applications. Mounting Options: Surface Mount Model (NM) Includes Easy-Hang Bracket Allowing One-Person Installation, Fits Standard 4" Electrical Box. Adjustable Height Trunnion (T) and Pendant (PA) Models are Shipped Ready For Field Installation of the Mount. Mounts are Shipped in a Separate Carton. EasyLED LED: Aluminum Boards Wattage: 40w Array: 37w, System: 40w; (Up to 100w HID Equivalent) 60w Array: 53w, System: 60w; (Up to 175w HID Equivalent) 84w Array: 74w, System: 84w; (Up to 175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 15

Spec Sheet IES Files

Optimized Spec Sheet Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 15 Flood

Spec Sheet IES Files

Optimized Spec Sheet Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 15 Wall

Spec Sheet Optimized Spec Sheet

IES Files Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25

Spec Sheet IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25 Flood

Spec Sheet IES Files

Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25 Wall

Spec Sheet IES Files

Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 45

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 45 Flood

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 45 Wall

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 55

Spec Sheet IES Files

Optimized Eagle 55 Spec Sheet Optimized Eagle 55 IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Adjustable Slipfitter. (Factory Installed) EasyLED: Aluminum Boards Wattage: 334w Array: 512w, System: 354w; (400-750ww HID Equivalent) 512w Array: 512w, System: 557w; (1000-1500w HID Equivalent) See Optimized Spec Sheet for additional Wattage Options. Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eclipse

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K; IP65 Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The fixture consists of two cast aluminum halves, uniquely hinged, sealed and latched for easy operation and maintenance from below. Bold-on arm is 37” (extends to 54” overall with fixture). Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

EGB1

Spec Sheet IES File

 

Specifications & Features:

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws. Fixture has Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: 22w Array: 21.7w, System: 23.8w; 37w: Array: 37.2w, System: 43w; 44w Array: 43.4w, System: 47.6w; 74w: Array: 74.4w, System: 86w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

EGB2

Spec Sheet IES File

 

Specifications & Features:

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws. Fixture has Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: 22w Array: 21.7w, System: 23.8w; 37w: Array: 37.2w, System: 43w; 44w Array: 43.4w, System: 47.6w; 74w: Array: 74.4w, System: 86w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 20 Bollard

Spec Sheet IES File

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Sand Cast Twin Arm Head, Sealed Driver Compartment. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Inner Lens to Seal LED Array. Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. Radiant™ LED: Aluminum Boards Wattage: Array: 16.5w, System: 19w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 20 Round

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Array Lens to Seal LED Array Mounting Options: Mounts to Square Poles with Included Arm, or Walls with Easy-Hang Option. Optional Round Pole Adaptor Available. EasyLED LED: Aluminum Boards Wattage: 17w Array: 16.5w, System: 19w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty:5-Year Warranty for -40°C to +50°C Environment.

Enterprise 20 Square

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Array Lens to Seal LED Array Mounting Options: Mounts to Square Poles with Included Arm, or Walls with Easy-Hang Option. Optional Round Pole Adaptor Available. EasyLED LED: Aluminum Boards Wattage:17w Array: 16.5w, System: 19w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 30 Garage – Round

Spec Sheet IES Files

Brochure

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Includes 3' Cord. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Finish: Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting Options: Surface Mount Model (NM) Includes Easy-Hang Bracket Allowing One-Person Installation, Fits Standard 4" Electrical Box. Adjustable Height Trunnion (T) and Pendant (PA) Models are Shipped Ready For Field Installation of the Mount. Mounts are Shipped in a Separate Carton. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 30 Garage – Square

Spec Sheet IES Files

Brochure

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Includes 3' Cord. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Finish: Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting Options: Surface Mount Model (NM) Includes Easy-Hang Bracket Allowing One-Person Installation, Fits Standard 4" Electrical Box. Adjustable Height Trunnion (T) and Pendant (PA) Models are Shipped Ready For Field Installation of the Mount. Mounts are Shipped in a Separate Carton. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 30 Round

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Black or Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting: Mounts to Round Poles or Walls with Included Arm or Optional Mounting Arm Adaptor for 2⅜˝ Horizontal Mounting Arms. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 30 Square

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Black or Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting: Mounts to Square Poles or Walls with Included Arm or Optional Mounting Arm Adaptor for 2⅜˝ Horizontal Mounting Arms. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 30HB

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing, Integral Heat Sinking. Includes 3' Cord. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; ENT30HBQ: IP54, Damp Locations; ENT30HBWQ: IP65, Wet Locations Finish: Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Array Lens with Integral Optics or SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens. Gasketed to Seal LED Array. Mounting Options: Mount with Included ¾″ Die Cast Hook. EasyLED LED: Aluminum Boards Wattage: 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 31 & 32 Round

Spec Sheet IES Files

Specifications & Features

Mounting Options: Accommodates “P3” 2⅞″ O.D. x 3″ Tenons Radiant™ LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Enterprise 31 & 32 Square

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting: Accommodates "P3" 2⅞″ O.D. x 3″ Tenons EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Enterprise Light Column

Spec Sheet IES Files

 

Specifications & Features

Housing: Extruded 12-foot Aluminum Housing with Die Cast Mounting Base, Sand Cast Twin Arm Head, and Sealed Driver Compartment. Includes PBR1 or PBS1 Decorative Clamshell Base Cover with Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens to Seal LED Array. Mounting Options: Mounts with Four M18 x 15" Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: 12w: Array 11.8, System 12.9; (70w HID Equivalent) 17w: Array: 16.5w, System: 18.1w; (70w HID Equivalent) 25w: Array 24.8w, System 27.1w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Florence 1

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant & Opti-FLUX LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V (Radiant, Full Cut-Off); Type III, V (Opti-FLUX, Prismatic) Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Constructed of cast aluminum featuring a hinged top for access into the lamp compartment. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Florence 2

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Constructed of cast aluminum featuring a hinged top for access into the lamp compartment. 3” slip fitter. Standard Florence 2 comes with 2 struts. Optional 4 struts are available as an adder. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Florence 3

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper dome & spun aluminum lower shade Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Hampton

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Hampton Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Hatteras Round Grid Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Grid Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Round Half Cutoff

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Half Cutoff Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.