Showing all 93 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Goosenecks +

Pole Diameter +

Pole Height +

AmberLED Compass Up or Down

Spec Sheet

Specifications & Features

Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Reflector: Wide, Medium and Narrow Distributions. Reflector: Wide, Medium and Narrow Distributions Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Amber COB Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

AmberLED Crest15

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 37w, System: 40w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

AmberLED Delmar 55

Spec Sheet IES Files

Specifications & Features

Housing: Low Profile Die Cast Aluminum Housing, ½" Coin Plugs with O-rings for Conduit or External Sensor. Built-in Sensor Housing with Color-Matched Polycarbonate Cover. A Clear Cover will be Provided When a Sensor is Ordered. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. (Damp Locations When Used with VNQM.) IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Molded UV-Resistant Acrylic Optical Lens Designed for Garage Lighting Applications. Mounting Options: Included Easy-Hang Bracket Fits Standard 4" Electrical Box, Allowing One-Person Installation. Optional Quick-Mount/Pendant Bracket Available. AmberLED: Aluminum Boards Wattage: 39w: Array: 39w, System: 43.4w; 52w: Array: 52w, System: 57.2w; (Up to 175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

AmberLED Eagle 15 Area

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

AmberLED Eagle 15 Flood

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

AmberLED Eagle 15 Wall

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Astro 2

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Decorative cast aluminum capital with acrylic globe Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Boca

Spec Sheet

Specifications & Features

Radiant LED: Conformal Coating LED light engine;  CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electronic: Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver;  Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: The housing is heavy cast aluminum, supporting solid aluminum support struts Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

Boca 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum housing with rings; Four uprights Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Boca 2

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum housing; Two uprights Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Bristol 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper housing & spun aluminum lower shade. The luminaire itself is held in place with a mechanical attachment & connected to the pole’s shaft with a cast aluminum hub fitter, welded to the arm & secured to the shaft with 3 set screws. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Bristol 2

Spec Sheet

Specifications & Features

Light Engine: Opti-FLUX LED, CCT: 27K, 3K, 4K, 5K Optical: Types III, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum spun shade with latch. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Calais

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (1800K), 22K 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Spun aluminum shades (optional). Includes leveler for pendant mount. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Cape May 1

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: This fixture’s housing is made of cast aluminum which holds the clear globe; available in either acrylic or polycarbonate. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Carlsbad 1

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 1 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 2

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 3

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

CAV 014

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 102

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 112

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 130

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

Cav 13W & 14W

Spec Sheet

IES Files - Cav 13 IES Files - Cav 14

Specifications & Features

Housing: Die Cast Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Flat Top, Sealed Driver Compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Inner Lens to Seal LED Array. Mounting Options: Mount over a 4″ Recessed Outlet Box. Radiant™ LED: Aluminum Boards Wattage: Array: 16.6w, System: 20.2w (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60H; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +40°C Environment.

CAV 142

Spec Sheet

Specifications & Features

Radiant™ LED: Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 193

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200,  2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 220

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 371

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 381

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 4

Spec Sheet

Specifications & Features

Radiant LED: Conformal Coating LED light engine;  CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type I, II, III, IV, V Electrical Electric: Electric Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver;  Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Bottom section is extruded aluminum 8” round x .125 wall with internal sturdy aluminum base for anchor bolt mounting to foundation. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 402

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 412

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 416

Spec Sheet

Specifications & Features

Radiant™ LED: Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 460

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2000, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 512

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 6

Spec Sheet IES Files

 

Specifications & Features

Radiant LED: Conformal Coating LED light engine;  CCT: 2700, 3000, 4000, 5000K Optical: Type I, II, III, IV, V Electrical Electric: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver;  Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: A heavy gauge cast aluminum dome secured to louvers with concealed tamper-proof stainless steel hardware. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

Compass Up and Down

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lenses. Reflector: Wide, Medium and Narrow Distributions. Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Cool Copper COB Wattage: COB 40w, System Input 40w (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Compass Up or Down

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Reflector: Wide, Medium and Narrow Distributions. Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Cool Copper COB Wattage: COB 20w, System Input 21w (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +50°C Environment. LM-79 Report Available on Select Models.

Coronado 1/2

Spec Sheet

Specifications & Features

Light Engine: Opti-FLUX LED, CCT: 27K, 3K, 4K, 5K Optical: Types III & V (Opti-FLUX) Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged top entry housing is held in place with a stainless steel latch. The top includes a leveler for knuckle mounting. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Coronado 3/4

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged top entry housing is held in place with a stainless steel latch. The top includes a leveler for knuckle mounting. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Crest 15

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: 25w Array: 24.78w, System: 27.1w; (175w HID Equivalent) 37w Array: 37.2w, System: 40.6; (250w HID Equivalent) 50w Array: 50w, System: 54.2w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 20

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 37w, System: 40.6w; (250w HID Equivalent) Array: 55.8w, System: 60.9w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 35

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. EasyLED LED: Aluminum Boards Wattage: Array: 46.5w, System: 52w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 44

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame, Integral Heat Sinking and Driver Compartment. Twist-Lock Photocell/Smart Controls Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded Type IV Polycarbonate Lens. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. Optional Trim Plate is Available for Use in Retrofit Applications to Cover Wall Surface Blemishes. EasyLED LED: Aluminum Boards Wattage: 25w: Array: 24.9w, System: 28.4w (100w HID Equivalent) 37w: Array: 37.3w, System: 41.8w (175w HID Equivalent) 81w: Array: 80.8w, System: 83.7w (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 25w, 6kV for 37 and 81w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Crest 45

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame, Integral Heat Sinking and Driver Compartment. Polycarbonate Vandal-Resistant Lens Area on Housing for Use with Microwave Sensors. Twist-Lock Photocell/Smart Controls Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded Type IV Polycarbonate Lens. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. Optional Trim Plate is Available for Use in Retrofit Applications to Cover Wall Surface Blemishes. LED: Aluminum Boards - +/- 300K per CCT Wattage: 81w: Array: 80.8w, System: 92.8w (175w HID Equivalent) 112w: Array: 111.9w, System: 131w (250w HID Equivalent) 174w: Array: 174.1w, System: 187.5w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, Dimmable Driver. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Danville

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K,  27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper dome & spun aluminum lower shade Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Delmar 34

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, ½˝ Coin Plugs with O-rings for Conduit & Photocell on Two Sides & Back, Nickel-Plated Stainless Steel Hardware Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. ADA Compliant. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED Low Profile LumaLens Opal Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit Radiant LED: Aluminum Boards Wattage: Array: 21.7w, System: 27w; (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Delmar 44

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, ½˝ Coin Plugs with O-rings for Conduit & Photocell on Three Sides & Back, Nickel-Plated Stainless Steel Hardware Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED Low Profile LumaLens Opal Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 45.4w, System: 53.7w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; or 347-480v, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Delmar 55

Spec Sheet IES Files

Specifications & Features

Housing: Low Profile Die Cast Aluminum Housing, ½” Coin Plugs with O-rings for Conduit or External Sensor. Built-in Sensor Housing with Color-Matched Polycarbonate Cover. A Clear Cover will be Provided When a Sensor is Ordered. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. (Damp Locations When Used with VNQM.); IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request Lens: Molded UV-Resistant Acrylic Optical Lens Designed for Garage Lighting Applications. Mounting Options: Included Easy-Hang Bracket Fits Standard 4” Electrical Box, Allowing One-Person Installation. Optional Quick-Mount/Pendant Bracket Available. Radiant™ LED: Aluminum Boards Wattage: 30w Array: 28; System: 30.5; (Up to 100w HID Equivalent) 37w Array: 37; System: 41; (Up to 100w HID Equivalent) 48w Array: 48.7; System: 53.9; (Up to 175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 15

Spec Sheet IES Files

Optimized Spec Sheet Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 15 Flood

Spec Sheet IES Files

Optimized Spec Sheet Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 15 Wall

Spec Sheet Optimized Spec Sheet

IES Files Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eclipse

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K; IP65 Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The fixture consists of two cast aluminum halves, uniquely hinged, sealed and latched for easy operation and maintenance from below. Bold-on arm is 37” (extends to 54” overall with fixture). Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Enterprise 20 Square

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Array Lens to Seal LED Array Mounting Options: Mounts to Square Poles with Included Arm, or Walls with Easy-Hang Option. Optional Round Pole Adaptor Available. EasyLED LED: Aluminum Boards Wattage:17w Array: 16.5w, System: 19w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Florence 1

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant & Opti-FLUX LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V (Radiant, Full Cut-Off); Type III, V (Opti-FLUX, Prismatic) Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Constructed of cast aluminum featuring a hinged top for access into the lamp compartment. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Florence 2

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Constructed of cast aluminum featuring a hinged top for access into the lamp compartment. 3” slip fitter. Standard Florence 2 comes with 2 struts. Optional 4 struts are available as an adder. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Florence 3

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper dome & spun aluminum lower shade Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

FWC AmberLED Compass – Up or Down

Spec Sheet

 

Specifications & Features

Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Includes Visor Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Reflector: Wide, Medium and Narrow Distributions Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Amber COB Wattage: COB 20w, System Input 21w; (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

FWC AmberLED Crest15

Spec Sheet

 

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Includes Full Baffle Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 37w, System: 40w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

FWC AmberLED Delmar 55

Spec Sheet

 

Specifications & Features

Housing: Low Profile Die Cast Aluminum Housing, ½" Coin Plugs with O-rings for Conduit or External Sensor. Built-in Sensor Housing with Color-Matched Polycarbonate Cover. A Clear Cover will be Provided When a Sensor is Ordered. Includes Full Baffle Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. (Damp Locations When Used with VNQM.); IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Molded UV-Resistant Acrylic Optical Lens Designed for Garage Lighting Applications. Mounting Options: Included Easy-Hang Bracket Fits Standard 4" Electrical Box, Allowing One-Person Installation. Optional Quick-Mount/Pendant Bracket Available. AmberLED: Aluminum Boards Wattage: 39w: Array: 39w, System: 43.4w; 52w: Array: 52w, System: 57.2w; (Up to 175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

FWC AmberLED Eagle 15

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Includes Full Baffle Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hampton

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Hampton Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Hatteras Round Grid Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Grid Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Round Half Cutoff

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Half Cutoff Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Round Open Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Open Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Hatteras Square Grid Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Grid Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Square Half Cutoff

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Half Cutoff Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Square Open Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Open Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Heritage

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V; Full Cutoff (No Lens option) Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Holland

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Huntington

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Opti-FLUX LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Jamestown

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: One piece cast aluminum NEMA head with tool-less entry latch Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Lexington

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Opti-FLUX LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V; No Secondary Lens Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz;  Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year Limited Warranty

Lexington 1

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Opti-FLUX LED (Stipple Globe); CCT: 27K, 3K, 4K, 5K Optical: Types III, V; Stipple Globe Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year Limited Warranty

Lexington 2

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Opti-FLUX LED (Prismatic Globe); CCT: 27K, 3K, 4K, 5K Optical: Types III, V; Prismatic Globe Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year Limited Warranty

Portsmouth

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V; Full Cutoff Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Postaire

Spec Sheet
Specifications & Features
Light Engine: Opti-FLUX LED; CCT: 27K, 3K, 4K, 5K Optical: Types III & V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-pin Twist-Lock Receptacle; 7-pin Twist-Lock Receptacle Housing: Choice of top spinning style (all styles are hinged) Finish:Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Underside of shade includes a reflective finish. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Regent 2

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Housing and arms are constructed of high quality aluminum. 3” Slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Revere

Spec Sheet

Specifications & Features

Light Engine: Radiant LED; CCT: AmberLED, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Aluminum cast housing with spun top & 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Salinas

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 18K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Spun aluminum roof, sand cast arms and capital Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Santa Fe 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 1 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 1 Wall

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2 Wall

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 18K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Sentinel

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Opti-FLUX LED; CCT: 27K, 3K, 4K, 5K Optical: Types III & V Glass Globe Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year Limited Warranty

Sherwood 1

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Sherwood 2

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Southgate

Spec Sheet

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter; Standard Southgate comes with 2 struts. Optional 4 struts are available as an adder. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Ventura 1

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K; IP65 Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-pin Twist-Lock Receptacle; 7-pin Twist-Lock Receptacle Housing: Consists of a molded aluminum rim and a spun aluminum canopy that combine for a sleek and compact appearance. Side mount on a horizontal tenon. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Ventura 2

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Consists of a molded aluminum rim and a spun aluminum canopy. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Winston

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V; full cutoff Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-pin Twist-Lock Receptacle, 7-pin Twist-Lock Receptacle Housing: Cast aluminum upper dome & spun aluminum lower shade Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty