Showing all 86 results

show blocks helper

Wattage +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Emergency/Exit Light +

Goosenecks +

Non-Illuminated +

Pole Diameter +

Pole Height +

AmberLED Crest12

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 22w, System: 24.8w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

AmberLED Crest15

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 37w, System: 40w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Astro 1

Spec Sheet

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Housing: Aluminum housing with 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Astro 1 Pendant

Spec Sheet

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Housing: Aluminum housing with 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Astro 2

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Decorative cast aluminum capital with acrylic globe Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Bel Aire 35

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing & Front Frame, Integral Heat Sinking, Driver compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount with Two-Piece Swivel Bracket, Adjustable Slipfitter, Yoke, Mounting Arm Adaptor or Wall Mount Bracket. EasyLED LED: Aluminum Boards Wattage: 174w Array: 175.2w, System: 187w; (250-400w HID Equivalent) 262w Array: 262w, System: 286w; (400-1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Bel Aire 55

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing & Front Frame, Integral Heat Sinking, Driver compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount with Adjustable Slipfitter. (Factory Installed) EasyLED LED: Aluminum Boards Wattage: 348w Array: 348w, System: 385.7w; (1000-1500w HID Equivalent) 524w Array: 524w, System: 568w; (1000-1500w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Boca

Spec Sheet

Specifications & Features

Radiant LED: Conformal Coating LED light engine;  CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electronic: Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver;  Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: The housing is heavy cast aluminum, supporting solid aluminum support struts Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

Boca 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum housing with rings; Four uprights Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Boca 2

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum housing; Two uprights Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Bristol 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper housing & spun aluminum lower shade. The luminaire itself is held in place with a mechanical attachment & connected to the pole’s shaft with a cast aluminum hub fitter, welded to the arm & secured to the shaft with 3 set screws. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Calais

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (1800K), 22K 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Spun aluminum shades (optional). Includes leveler for pendant mount. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Cape May 1

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: This fixture’s housing is made of cast aluminum which holds the clear globe; available in either acrylic or polycarbonate. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Carlsbad 1

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 1 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 2

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 3

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

CAV 014

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 102

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 112

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 130

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 142

Spec Sheet

Specifications & Features

Radiant™ LED: Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 193

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200,  2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 22

Spec Sheet IES Files

Specifications & Features

Radiant™ LED

  • Conformal Coating LED light engine
  • CCT: Amber, LPS (1800K), 2200K, 2700K, 3000K, 4000K, 5000K
  • Static Colors Available - Contact Factory
Optical
  • Types II, III, IV, & V
Electrical
  • Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz
  • 0-10v Dimmable Driver
  • Standard Surge Protection included (6kV lineline; 10k-V line-earth)
Controls (Optional)
  • Button Eye Photo Control (PC)
  • House Side Shield (H)
Housing Formed aluminum housing with 4 open panels. Tamper-proof stainless steel hardware. Finish
  • Super durable polyester powder coat finish.
  • Custom finishes available, including patinas and all RAL colors
Listing & Ratings
  • ETL listed to UL 1598 standard for wet location • LED is IP66 Rated
Warranty
  • 5 year limited warranty

CAV 220

Spec Sheet

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 371

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 381

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 4

Spec Sheet

Specifications & Features

Radiant LED: Conformal Coating LED light engine;  CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type I, II, III, IV, V Electrical Electric: Electric Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver;  Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Bottom section is extruded aluminum 8” round x .125 wall with internal sturdy aluminum base for anchor bolt mounting to foundation. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 402

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 412

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 416

Spec Sheet

 

Specifications & Features

Radiant™ LED: Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 460

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2000, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

CAV 512

Spec Sheet

 

Specifications & Features

Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty

Coronado 3/4

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged top entry housing is held in place with a stainless steel latch. The top includes a leveler for knuckle mounting. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Crest 44

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame, Integral Heat Sinking and Driver Compartment. Twist-Lock Photocell/Smart Controls Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded Type IV Polycarbonate Lens. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. Optional Trim Plate is Available for Use in Retrofit Applications to Cover Wall Surface Blemishes. EasyLED LED: Aluminum Boards Wattage: 25w: Array: 24.9w, System: 28.4w (100w HID Equivalent) 37w: Array: 37.3w, System: 41.8w (175w HID Equivalent) 81w: Array: 80.8w, System: 83.7w (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 25w, 6kV for 37 and 81w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Crest 45

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame, Integral Heat Sinking and Driver Compartment. Polycarbonate Vandal-Resistant Lens Area on Housing for Use with Microwave Sensors. Twist-Lock Photocell/Smart Controls Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded Type IV Polycarbonate Lens. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. Optional Trim Plate is Available for Use in Retrofit Applications to Cover Wall Surface Blemishes. LED: Aluminum Boards - +/- 300K per CCT Wattage: 81w: Array: 80.8w, System: 92.8w (175w HID Equivalent) 112w: Array: 111.9w, System: 131w (250w HID Equivalent) 174w: Array: 174.1w, System: 187.5w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, Dimmable Driver. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Danville

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K,  27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper dome & spun aluminum lower shade Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Eagle 25

Spec Sheet IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25 Flood

Spec Sheet IES Files

Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25 Wall

Spec Sheet IES Files

Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 45

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 45 Flood

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 45 Wall

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 55

Spec Sheet IES Files

Optimized Eagle 55 Spec Sheet Optimized Eagle 55 IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Adjustable Slipfitter. (Factory Installed) EasyLED: Aluminum Boards Wattage: 334w Array: 512w, System: 354w; (400-750ww HID Equivalent) 512w Array: 512w, System: 557w; (1000-1500w HID Equivalent) See Optimized Spec Sheet for additional Wattage Options. Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eclipse

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K; IP65 Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The fixture consists of two cast aluminum halves, uniquely hinged, sealed and latched for easy operation and maintenance from below. Bold-on arm is 37” (extends to 54” overall with fixture). Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Enterprise 30 Garage – Round

Spec Sheet IES Files

Brochure

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Includes 3' Cord. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Finish: Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting Options: Surface Mount Model (NM) Includes Easy-Hang Bracket Allowing One-Person Installation, Fits Standard 4" Electrical Box. Adjustable Height Trunnion (T) and Pendant (PA) Models are Shipped Ready For Field Installation of the Mount. Mounts are Shipped in a Separate Carton. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 30 Garage – Square

Spec Sheet IES Files

Brochure

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Includes 3' Cord. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Finish: Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting Options: Surface Mount Model (NM) Includes Easy-Hang Bracket Allowing One-Person Installation, Fits Standard 4" Electrical Box. Adjustable Height Trunnion (T) and Pendant (PA) Models are Shipped Ready For Field Installation of the Mount. Mounts are Shipped in a Separate Carton. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 30 Round

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Black or Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting: Mounts to Round Poles or Walls with Included Arm or Optional Mounting Arm Adaptor for 2⅜˝ Horizontal Mounting Arms. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 30 Square

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Black or Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting: Mounts to Square Poles or Walls with Included Arm or Optional Mounting Arm Adaptor for 2⅜˝ Horizontal Mounting Arms. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Enterprise 31 & 32 Round

Spec Sheet IES Files

Specifications & Features

Mounting Options: Accommodates “P3” 2⅞″ O.D. x 3″ Tenons Radiant™ LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Enterprise 31 & 32 Square

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Sand Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array Mounting: Accommodates "P3" 2⅞″ O.D. x 3″ Tenons EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 41w; (70-150w HID Equivalent) 65w Array: 65.3w, System: 72w; (150-250w HID Equivalent) 100w Array: 100w, System: 111w; (150-250w HID Equivalent) 140w Array: 139.9w, System: 156w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Florence 1

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant & Opti-FLUX LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V (Radiant, Full Cut-Off); Type III, V (Opti-FLUX, Prismatic) Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Constructed of cast aluminum featuring a hinged top for access into the lamp compartment. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Florence 2

Spec Sheet

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Constructed of cast aluminum featuring a hinged top for access into the lamp compartment. 3” slip fitter. Standard Florence 2 comes with 2 struts. Optional 4 struts are available as an adder. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Florence 3

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper dome & spun aluminum lower shade Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

FWC AmberLED Crest15

Spec Sheet

 

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Includes Full Baffle Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 37w, System: 40w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

FWC AmberLED Vaporproof – Angled Shade

Spec Sheet

Specifications & Features

Housing: Heavy Duty Die Cast Aluminum Housing with Integral Heat Sinking, ¾˝ NPS Threaded Mounts. Includes Shade Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment Finish: Smooth Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Flat Clear Tempered Glass Lens Mounting Options: Pendant Mount or Surface Mount on Wall or Ceiling AmberLED: Aluminum Boards Wattage: Array: 22w, System: 27w (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment

FWC AmberLED Vaporproof – Straight Shade

Spec Sheet

 

Specifications & Features

Housing: Heavy Duty Die Cast Aluminum Housing with Integral Heat Sinking, ¾˝ NPS Threaded Mounts. Includes Shade Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment Finish: Smooth Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Flat Clear Tempered Glass Lens Mounting Options: Pendant Mount or Surface Mount on Ceiling. AmberLED: Aluminum Boards Wattage: Array: 22w, System: 27w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Hampton

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Hampton Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Hatteras Round Grid Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Grid Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Round Half Cutoff

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Half Cutoff Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Square Grid Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Grid Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Square Half Cutoff

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Half Cutoff Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Square Open Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Open Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Heritage

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V; Full Cutoff (No Lens option) Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Holland

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Huntington

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Opti-FLUX LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Jamestown

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: One piece cast aluminum NEMA head with tool-less entry latch Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Lexington

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Opti-FLUX LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V; No Secondary Lens Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz;  Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year Limited Warranty

Portsmouth

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V; Full Cutoff Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Regent 2

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Housing and arms are constructed of high quality aluminum. 3” Slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Revere

Spec Sheet

Specifications & Features

Light Engine: Radiant LED; CCT: AmberLED, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Aluminum cast housing with spun top & 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Salinas

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 18K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Spun aluminum roof, sand cast arms and capital Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Santa Fe 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 1 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 1 Wall

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2 Wall

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 18K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Sherwood 1

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Sherwood 2

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Southgate

Spec Sheet

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter; Standard Southgate comes with 2 struts. Optional 4 struts are available as an adder. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Trek 30Q

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing with Integral Heat Sinking. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded UV-Stabilized Polycarbonate or SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lenses to Seal LED Array. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. No Surface Conduit Entrance. EasyLED LED: Aluminum Boards Wattage: 14w: Array: 14.5w, System: 16.1w 22w: Array: 21.7w, System: 24.8w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Ventura 1

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K; IP65 Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-pin Twist-Lock Receptacle; 7-pin Twist-Lock Receptacle Housing: Consists of a molded aluminum rim and a spun aluminum canopy that combine for a sleek and compact appearance. Side mount on a horizontal tenon. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Ventura 2

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Consists of a molded aluminum rim and a spun aluminum canopy. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Winston

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V; full cutoff Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-pin Twist-Lock Receptacle, 7-pin Twist-Lock Receptacle Housing: Cast aluminum upper dome & spun aluminum lower shade Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty