Showing all 80 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Emergency/Exit Light +

Goosenecks +

Non-Illuminated +

Pole Diameter +

Pole Height +

AmberLED Crest12

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 22w, System: 24.8w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

AmberLED Crest15

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 37w, System: 40w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

AmberLED Eagle 15 Area

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

AmberLED Eagle 15 Flood

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

AmberLED Eagle 15 Wall

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

AmberLED Eagle 25 Area

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 81w: Array: 80.5w, System: 86.6w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

AmberLED Eagle 25 Flood

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 81w: Array: 80.5w, System: 86.6w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

AmberLED Eagle 25 Wall

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 81w: Array: 80.5w, System: 86.6w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

AmberLED Eagle 45 Area

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) Amber LED: Aluminum Boards Wattage: Array: 167.3w, System: 180w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

AmberLED Eagle 45 Flood

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) Amber LED: Aluminum Boards Wattage: Array: 167.3w, System: 180w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

AmberLED Eagle 45 Wall

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) Amber LED: Aluminum Boards Wattage: Array: 167.3w, System: 180w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Basal

Spec Sheet

   

Specifications & Features

Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Basal Flood

Spec Sheet

 

Specifications & Features

Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Basal Wall

Spec Sheet

 

Specifications & Features

Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Bel Aire 35

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing & Front Frame, Integral Heat Sinking, Driver compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount with Two-Piece Swivel Bracket, Adjustable Slipfitter, Yoke, Mounting Arm Adaptor or Wall Mount Bracket. EasyLED LED: Aluminum Boards Wattage: 174w Array: 175.2w, System: 187w; (250-400w HID Equivalent) 262w Array: 262w, System: 286w; (400-1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Bel Aire 55

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing & Front Frame, Integral Heat Sinking, Driver compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount with Adjustable Slipfitter. (Factory Installed) EasyLED LED: Aluminum Boards Wattage: 348w Array: 348w, System: 385.7w; (1000-1500w HID Equivalent) 524w Array: 524w, System: 568w; (1000-1500w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Bristol 2

Spec Sheet

Specifications & Features

Light Engine: Opti-FLUX LED, CCT: 27K, 3K, 4K, 5K Optical: Types III, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum spun shade with latch. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty

Carlsbad 1

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 1 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 2

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Carlsbad 3

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Chesapeake 30c3 16″ High Bay

Spec Sheet

 

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Externally Mounted Driver. Listing & Ratings: CSA: Listed for Dry Locations, ANSI/UL 1598, 8750; IP65 (with Lenses); IP44 (Open) Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Can Be Used Without Lens or with Tempered Clear Flat Glass Lens, Acrylic Drop Lens, Acrylic Conical Lens, UV-Stabilized Polycarbonate Drop Lens Mounting Options: Mount with Included ¾″ Die Cast Hook. Adjustable Junction Box Also Accepts ¾″ Conduit. COB LED: QSSI Cool Copper COB Wattage: 120w COB: 120w; System: 123w; (250w HID Equivalent) 200w COB: 200w; System: 197w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (200w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Chesapeake 44 16″ Aisle Lighter

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Includes 4″ Stem. Maximum Stem Length: 30 Feet Listing & Ratings: CSA: Listed for Damp Locations, ANSI/UL 1598, 8750 (Lens Gasket Use Required); IP65 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount with Included 1″ Die Cast Hook. EasyLED LED: Aluminum Boards Wattage: Array: 169w; System: 178.5w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Chesapeake 44 16″ High Bay

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Includes 4″ Stem. Maximum Stem Length: 30 Feet Listing & Ratings: CSA: Listed for Damp Locations, ANSI/UL 1598, 8750 (Lens Gasket Use Required); IP65 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens, UV-Stabilized Polycarbonate Drop Lens, Acrylic Drop Lens, Acrylic Conical Lens. Mounting Options: Mount with Included ¾″ Die Cast Hook. EasyLED LED: Aluminum Boards Wattage: Array: 169w; System: 178.5w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Chesapeake 44 16″ Narrow Beam Highbay

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Includes 4″ Stem. Listing & Ratings: CSA: Listed for Damp Locations, ANSI/UL 1598, 8750 (Lens Gasket Use Required); IP65 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount with Included 1″ Die Cast Hook. EasyLED LED: Aluminum Boards Wattage: Array: 169w; System: 178.5w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Chesapeake 45 22″ Aisle Lighter

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Includes 4″ Stem. Maximum Stem Length: 30 Feet. Listing & Ratings: CSA: Listed for Damp Locations, ANSI/UL 1598, 8750 (Lens Gasket Use Required); IP65 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens, UV-Stabilized Polycarbonate Drop Lens, Acrylic Drop Lens, Acrylic Conical Lens. Mounting Options: Mount with Included 1″ Die Cast Hook. EasyLED LED: Aluminum Boards Wattage: Array: 275.4w, System: 296.4w; (400-1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Chesapeake 45 22″ High Bay

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Includes 4″ Stem. Maximum Stem Length: 30 Feet. Listing & Ratings: CSA: Listed for Damp Locations, ANSI/UL 1598, 8750 (Lens Gasket Use Required); IP65 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens, UV-Stabilized Polycarbonate Drop Lens, Acrylic Drop Lens, Acrylic Conical Lens. Mounting Options: Mount with Included 1″ Die Cast Hook. EasyLED LED: Aluminum Boards Wattage: Array: 275.4w, System: 296.4w; (400-1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Chesapeake 45 22″ Narrow Beam Highbay

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Includes 4″ Stem. Listing & Ratings: CSA: Listed for Damp Locations, ANSI/UL 1598, 8750 (Lens Gasket Use Required); IP65 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens, UV-Stabilized Polycarbonate Drop Lens, Acrylic Drop Lens, Acrylic Conical Lens. Mounting Options: Mount with Included 1″ Die Cast Hook. EasyLED LED: Aluminum Boards Wattage: Array: 275.4w, System: 296.4w; (400-1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Chesapeake 45C3 22″ High Bay

Spec Sheet

 

Specifications & Features

Housing: Die Cast Aluminum Housing with External Heat Sinks for Cooler Operating Temperatures. Includes 4″ Stem. Maximum Stem Length: 30 Feet. Listing & Ratings: CSA: Listed for Damp Locations, ANSI/UL 1598, 8750 (Lens gasket required.) IP65 (with Lenses); IP44 (Open) Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens, UV-Stabilized Polycarbonate Drop Lens, Acrylic Drop Lens, Acrylic Conical Lens. Mounting Options: Mount with Included 1″ Die Cast Hook. COB LED: Cool Copper COB Wattage: COB: 320w; System: 316w; (1,000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Compass Bullet

Spec Sheet IES Files

Specifications & Features

Housing: Die-Cast Gasketed Aluminum Housing and Front Frame. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request Lens: Tempered Clear Flat Glass Lens. Mounting Options: Adjustable Knuckle with ½” NPS Threads. COB LED: Cool Copper COB Wattage: COB: 10w, System: 9w; (50w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Non-Dimmable 12V: Electronic Driver, 12-17VAC Input, 50/60Hz, Non-Dimmable Warranty: 5-Year Warranty for -40°C to +40°C Environment. See Page 2 for Projected Lumen Maintenance Table.

Compass Mini-Flood

Spec Sheet IES Files

Specifications & Features

Housing: Die-Cast Gasketed Aluminum Housing and Front Frame with Integral Heat-Dissipating Fins for Thermal Management. Nickel-Plated Stainless Steel Hardware Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Adjustable Knuckle with ½” NPS Threads. COB LED: PEMCO Cool Copper COB Wattage: 20w: COB 20w, System Input 21w (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. 12V: Electronic Driver, 12-17VAC Input, 50/60Hz, Non-Dimmable Warranty: 5-Year Warranty for -40°C to +50°C Environment. LM-79 Report Available on Select Models.

Compass Up and Down

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lenses. Reflector: Wide, Medium and Narrow Distributions. Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Cool Copper COB Wattage: COB 40w, System Input 40w (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Compass Up or Down

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Reflector: Wide, Medium and Narrow Distributions. Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Cool Copper COB Wattage: COB 20w, System Input 21w (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +50°C Environment. LM-79 Report Available on Select Models.

Copper Path Lights

Spec Sheet

Housing: 7”, 9” or 11” Diameter Spun Copper shade with White Reflective Powdercoat Finish on the Underside. Adjustable Lampholder Housing with Clear Glass Lens. “No Tools Needed” entry for relamping. Includes 36” Cable with Wire Connector. Bright Polished Copper will age to a dark copper patina. Mounting Options: Choice of 19”, 31” or 37” Copper Stanchions (Included) LED Lamp (included): 2.5w 190 lumens 12v (requires Transformer, not included) 3000K or 4000K CCT 30,000+ Hours

Crest 12

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 15w, System: 15.8w; (150w HID Equivalent) Array: 21.7w, System: 23.7w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 15

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: 25w Array: 24.78w, System: 27.1w; (175w HID Equivalent) 37w Array: 37.2w, System: 40.6; (250w HID Equivalent) 50w Array: 50w, System: 54.2w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 20

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 37w, System: 40.6w; (250w HID Equivalent) Array: 55.8w, System: 60.9w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 35

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. EasyLED LED: Aluminum Boards Wattage: Array: 46.5w, System: 52w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 36

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Meets Dark Sky Requirements. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. EasyLED LED: Aluminum Boards Wattage: Array: 46.5w, System: 52w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Eagle 15

Spec Sheet IES Files

Optimized Spec Sheet Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 15 Flood

Spec Sheet IES Files

Optimized Spec Sheet Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 15 Wall

Spec Sheet Optimized Spec Sheet

IES Files Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25

Spec Sheet IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25 Flood

Spec Sheet IES Files

Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25 Wall

Spec Sheet IES Files

Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 45

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 45 Flood

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 45 Wall

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eagle 55

Spec Sheet IES Files

Optimized Eagle 55 Spec Sheet Optimized Eagle 55 IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Adjustable Slipfitter. (Factory Installed) EasyLED: Aluminum Boards Wattage: 334w Array: 512w, System: 354w; (400-750ww HID Equivalent) 512w Array: 512w, System: 557w; (1000-1500w HID Equivalent) See Optimized Spec Sheet for additional Wattage Options. Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Eclipse

Spec Sheet

Specifications & Features

Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K; IP65 Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The fixture consists of two cast aluminum halves, uniquely hinged, sealed and latched for easy operation and maintenance from below. Bold-on arm is 37” (extends to 54” overall with fixture). Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

EGB1

Spec Sheet IES File

 

Specifications & Features:

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws. Fixture has Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: 22w Array: 21.7w, System: 23.8w; 37w: Array: 37.2w, System: 43w; 44w Array: 43.4w, System: 47.6w; 74w: Array: 74.4w, System: 86w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

EGB2

Spec Sheet IES File

 

Specifications & Features:

Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws. Fixture has Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: 22w Array: 21.7w, System: 23.8w; 37w: Array: 37.2w, System: 43w; 44w Array: 43.4w, System: 47.6w; 74w: Array: 74.4w, System: 86w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

FWC AmberLED Crest12

Spec Sheet

 

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Includes Full Baffle Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 22w, System: 24.8w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

FWC AmberLED Crest15

Spec Sheet

 

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Includes Full Baffle Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 37w, System: 40w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

FWC AmberLED Eagle 15

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Includes Full Baffle Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

FWC AmberLED Eagle 25

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Includes Full Baffle Required to Maintain FWC Certification. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: Array: 81w, System: 81.5w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Hampton

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Hampton Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: The hinged roof opens with one fastener for ease of relamping. 3” slip fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Heritage

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V; Full Cutoff (No Lens option) Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Holland

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

HUR 15

Spec Sheet

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing Listing & Ratings: ETL Listed for Hazardous Locations Per UL844 as Follows: Class 1, Division 2 Groups A, B, C, D; T4 Temperature Rating, -25°C to +50°C Ambient. Suitable for Wet Locations, Sealed LED Compartment Finish: Powdercoat Finish Over a Chromate Conversion Coating. Lens: Clear Tempered Glass Lens Mounting Options: Mountings Include Suspended (Conduit by Others), Ceiling Mount Box, 25° and 90° Wall Mount with Box, 25° and 90° Stanchions, and Adjustable Yoke. Yoke Mount Includes 3´ 16/3 SJOOW Cord and Rated Connector. Rated for 6 #12 AWG 90°C for Through Wiring. Mounts Shipped Separately, Field Installed. EasyLED LED: Aluminum Boards Wattage: Array: 56.7w, System: 64w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty

PAL 50

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing & Hinged Front Frame, ½˝ Coin Plugs for Conduit & Photocell. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens Mounting Options: Mount with Two-Piece Swivel Bracket, Adjustable Slipfitter, 6˝, 10˝ or 12˝ Extruded Mounting Arm. EasyLED LED: Aluminum Boards Wattage: Array: 55.8w, System: 62w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

PAL 70

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing & Hinged Front Frame, ½˝ Coin Plugs for Conduit & Photocell. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens Mounting Options: Mount with Two-Piece Swivel Bracket, Adjustable Slipfitter, 6˝, 10˝ or 12˝ Extruded Mounting Arm. EasyLED LED: Aluminum Boards Wattage: Array: 87.6w, System: 91w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

PLF2

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Extruded Die Cast Aluminum Housing with Die Cast End Caps and Stainless Steel Lens Clips. Anodized Aluminum Reflector. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Adjustable Knuckle with Angle Indicators & ½˝ NPS Threads or Adjustable Surface Mount Brackets with Angle Indicators. EasyLED: Aluminum Boards Wattage: 23w: Array 23w, System 27w (100w HID Equivalent) 37w: Array 37w, System 43.4w (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 23w, 4kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

PLF3

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Extruded Die Cast Aluminum Housing with Die Cast End Caps and Stainless Steel Lens Clips. Anodized Aluminum Reflector. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Adjustable Knuckle with Angle Indicators & ½˝ NPS Threads or Adjustable Surface Mount Brackets with Angle Indicators. EasyLED: Aluminum Boards Wattage: 23w: Array 23w, System 27w (100w HID Equivalent) 37w: Array 37w, System 43.4w (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 23w, 4kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Portsmouth

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V; Full Cutoff Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 1

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 1 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 1 Wall

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2 Pendant

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2 Wall

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 18K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Sherwood 1

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Sherwood 2

Spec Sheet IES Files

Finials & Capitals

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; 3-Pin Twist-Lock Receptacle; 7-Pin Twist-Lock Receptacle Housing: Decorative capital housing choices with 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Station 16

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with IP66 Driver Compartment. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Recessed Mount EasyLED LED: Aluminum Boards Wattage: Array: 111.5w; System: 127w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Station 20

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with IP66 Driver Compartment. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Recessed Mount EasyLED LED: Aluminum Boards Wattage: Array: 185.9w; System: 206w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Swan 5

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Adjustable Knuckle with ½˝ NPS Threads. Radiant LED: Aluminum Boards Wattage:22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty:5-Year Warranty for -40°C to +50°C Environment.

Wedge – Large

Spec Sheet IES Files

Specifications & Features

Housing: Die-Cast Gasketed Aluminum Housing, Includes Cast-In Box Template and Built in Level. White Reflector Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount Directly Over Recessed Electrical Box or Use ½″ Surface Conduit. COB LED: Cool Copper COB Wattage: 60w: COB 60w, System Input 56w (250w HID Equivalent) 80w: COB 80w, System Input 80w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +50°C Environment. LM-79 Report Available on Select Models

Wedge – Small

Spec Sheet IES Files

Specifications & Features

Housing: Die-Cast Gasketed Aluminum Housing, Includes Cast-In Box Template and Built in Level. White Reflector. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount Directly Over Recessed Electrical Box or use ½˝ Surface Mount Conduit. Adjustable Knuckle with ½˝ NPS Threads, Sold Separately, Field Installed. COB LED: QSSI Cool Copper COB Wattage: 20w COB: 20w, System: 21w; (100w HID Equivalent) Note: 12V Model is 20w only. 40w COB 40w, System: 43w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; 347-480V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 20w, 6kV for 40w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. 12V: Electronic Driver, 12-17VAC Input, 50/60Hz, Non-Dimmable (20w Model Only) Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Wedge – Small Flood

Spec Sheet IES Files

Specifications & Features

Housing: Die-Cast Gasketed Aluminum Housing, Includes Cast-In Box Template and Built in Level. White Reflector. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount Directly Over Recessed Electrical Box or use ½˝ Surface Mount Conduit. Adjustable Knuckle with ½˝ NPS Threads, Sold Separately, Field Installed. COB LED: QSSI Cool Copper COB Wattage: 20w COB: 20w, System: 21w; (100w HID Equivalent) Note: 12V Model is 20w only. 40w COB 40w, System: 43w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; 347-480V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 20w, 6kV for 40w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. 12V: Electronic Driver, 12-17VAC Input, 50/60Hz, Non-Dimmable (20w Model Only) Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment