3-Pin Twist Lock Receptable
Spec Sheet
Features:- 12˝ (180mm) Leads, AWG# 14, AWM1015
- UL773/ANSI C136.10-1996 Receptacle
- Phenolic Socket
- Includes ABS Housing
- 480V Max., 15 Amp Max
- Input Voltage: 480VAC
- Ambient Temperature: -40˚F ~ +176˚F
- Relative Humidity: 99%
- Listing: UL Recognized Component Mark
7-Pin Twist Lock Receptable
Spec Sheet
Features:- UL773/ANSI C136.10-2006 Receptacle
- ANSI C136.41-2013 Dimming Control Between an External Locking Type Photocontrol and Ballast or Driver
- UV Stabilized Polycarbonate
- 12″ #14 AWG AWM1015 (Power Leads); 12″ #18 AWG, AWM1015 (Signal Leads)
- 30 VDC, 0.25A Max Signal Loading
- Signal Contacts (4) - Nickel Plated Phosphor Bronze, Gold Plated
- Skirt Gasket to Achieve IP65 Rating
- Input Voltage: 480VAC
- Ambient Temperature: -40˚F ~ +176˚F
- Relative Humidity: 99%
- Listing: UL Recognized Component Mark
Banner Arm Light
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast and Extruded Aluminum Housing with Separate Driver Compartment in Mounting Arm. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Extrusion. Finish: Textured Architectural Black Powdercoat Finish. Wiring: Includes 15´ 3-Wire Cord. Mounting Options: 4″ or 5″ Die Cast Aluminum Pole Clamps COB LED: LED COB Wattage: LED: 2x5w; System: 10w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Provided with Factory-Installed Photocell That is Internally Wired for Switching Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -30°C to +50°C Environment.
Banner Arms
Spec Sheet
Specifications & Features
Construction: The banner arm is welded or threads into a mounting plate or a post clamp. All welding is per ANSI/AWS D1.2-90. All welders are certified per ANSI/AWS D1.2-90 Section 5. Materials: The end caps and clamp-ons are copper-free cast aluminum produced from certified ASTM ingot. The banner arm and mounting plate are aluminum, ASTM 6061, heat treated to a T6 temper. All hardware is stainless steel. Installation: Pemco’s banner arms are round extruded schedule 80 aluminum pipe with removable cast aluminum end cap. The bolt-on banner arm bolts to a mounting channel on the side of the post with four stainless steel screws. The clamp-on mountings clamp around the post, secured with two 1/4” hex head stainless steel bolts. (Post diameter at mounting point must be specified.) Clamp mounts feature the same basic coupling for 4” and 5”, and are also available in a custom size for larger poles. A minimum mounting height of 10 feet is recommended for the bottom banner arm. Arms are not designed for pedestrian interference. Bottom eyebolts and banner arms with breakaway couplings are optional and recommended because of the wind load from the banner. Optional eyebolts screw directly into the banner arm. Clampon eyebolts are also available (ordered separately--see page 2). Dimensions: Banner arms are available in 3/4” SCH 80 Pipe (1.05 OD). Standard length is 24”. Custom lengths are available (must be specified at time of order). Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty
Button Eye Photo Control
Spec Sheet
Features:- Dusk-to-dawn control of outdoor lighting
- Floodlights and security lighting
- Ideal for LED fixtures totaling 1650 W @ 277 VAC
- Non-drifting silicon light sensor IR filtered for human eye response
- Zero-cross technology helps device withstand severe inrush current and extends relay life
- Exceeds 10,000 ON/OFF operations at full load to match life expectancy of LED fixtures
- All components meet 15-year life requirements
Eyebolts
Spec Sheet
Specifications & Features
Materials: Eye bolts are stainless steel.The clamps for the clamp-on eye bolts are copper-free cast aluminum produced from certified ASTM ingot. Installation: Bolt-on Eyebolts (EB-BO) screw into the post (must indicate location). The clamp-on mountings (EB-CO) clamp around the post, secured with two 1/4” hex head stainless steel bolts. Post diameter at mounting point must be specified. Clamp mounts feature the same basic coupling for 4” and 5”, and are also available in a custom size for larger poles. Double eye bolts, positioned at 180°, are available. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty
