Showing all 7 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Emergency/Exit Light +

Goosenecks +

Pole Diameter +

Pole Height +

Banner Arm Light

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Extruded Aluminum Housing with Separate Driver Compartment in Mounting Arm. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Extrusion. Finish: Textured Architectural Black Powdercoat Finish. Wiring: Includes 15´ 3-Wire Cord. Mounting Options: 4″ or 5″ Die Cast Aluminum Pole Clamps COB LED: LED COB Wattage: LED: 2x5w; System: 10w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Provided with Factory-Installed Photocell That is Internally Wired for Switching Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -30°C to +50°C Environment.

Decorative Luminaire Mounting Device

Spec Sheet

Specifications & Features

All mounting devices fit 2 3/8” horizontal oriented arms attached with six 1 1/4” - 20 set screws. • Mounting devices (knuckles) are used as levelers for pendant mounted luminaires. Options: (PMD-001 and PMD-002 only):
  • 3-pin twist-lock receptacle (PCR3.) Sensor by others.
  • 7-pin twist-lock receptacle (PCR7.) Sensor by others.
  • Finial

Eyebolts

Spec Sheet

Specifications & Features

Materials: Eye bolts are stainless steel.The clamps for the clamp-on eye bolts are copper-free cast aluminum produced from certified ASTM ingot. Installation: Bolt-on Eyebolts (EB-BO) screw into the post (must indicate location). The clamp-on mountings (EB-CO) clamp around the post, secured with two 1/4” hex head stainless steel bolts. Post diameter at mounting point must be specified. Clamp mounts feature the same basic coupling for 4” and 5”, and are also available in a custom size for larger poles. Double eye bolts, positioned at 180°, are available. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

Flag Pole Holder

Spec Sheet

Specifications & Features

Materials: Flagpole holders consist of a one piece aluminum alloy tubing welded at a 45° angle to a mounting foot. Flagpole holders are heat treated to a T6 hardness for maximum strength. All hardware is stainless steel. Holders are 1” OD. Contact the factory for custom options. Installation: The bolt-on flagpole holders (FPH-1-BO) bolt to the side of the post with four stainless steel screws. Location must be specified. Clamp-on mountings (FPH-1-CO) clamp around the post (4” or 5” OD) and are secured with two 1/4” stainless steel bolts. Post diameter at mounting point must be specified. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

Flower Hanger

Spec Sheet

Specifications & Features

Construction: The Flower/Plant Hanger is welded or threads into a mounting plate or a post clamp. All welding is per ANSI/AWS D1.2-90. All welders are certified per ANSI/AWS D1.2-90 Section 5. Materials: The end caps and clamp-ons are copper-free cast aluminum produced from certified ASTM ingot. The hanger and mounting plate are aluminum, ASTM 6061, heat treated to a T6 temper. All hardware is stainless steel. Installation: Pemco’s Flower/Plant Hangers are round extruded schedule 80 aluminum pipe with removable cast aluminum end cap. The bolt-on hanger bolts to a mounting channel on the side of the post with four stainless steel screws. The clamp-on mountings clamp around the post, secured with two 1/4” hex head stainless steel bolts. (Post diameter at mounting point must be specified.) Clamp mounts feature the same basic coupling for 4” and 5”, and are also available in a custom size for larger poles. Each Flower/Plant Hanger includes one eyebolt. Hangers are not designed for pedestrian interference. Dimensions: Flower/Plant Hangers are available in 3/4” SCH 80 Pipe (1.05 OD). Standard length is 24”. Custom lengths are available (must be specified at time of order). Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

PWM 9 & 10

Spec Sheet

Specifications & Features

Pemco’s Stem Kits are constructed of aluminum and come cut to your desired length (please designate length at time of ordering). Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty on paint finish only.