Showing all 7 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Emergency/Exit Light +

Goosenecks +

Pole Diameter +

Pole Height +

PLA 491

Spec Sheet

Specifications & Features

PEMCO light brackets and Shepherd’s Crooks are constructed out of seamless aluminum tubing. These products include factory installed rubber grommets for wireways, press-on end caps and hub/set screw shaft mounting connection for easy orientation adjustment in the field. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PPMB 11

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PPMB 13

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PPMB 14

Spec Sheet

Specifications & Features

PEMCO light brackets and Shepherd’s Crooks are constructed out of seamless aluminum tubing. These products include factory installed rubber grommets for wireways, press-on end caps and hub/set screw shaft mounting connection for easy orientation adjustment in the field. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PPMB 16

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. These products include factory installed rubber grommets for wireways, press-on end caps and hub/set screw shaft mounting connection for easy orientation adjustment in the field. Arm Orientation: Standard double arm orientation is 180°. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PPMB 17

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PWMB 27

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.