Showing all 10 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Emergency/Exit Light +

Goosenecks +

Non-Illuminated +

Pole Diameter +

Pole Height +

PLA 121

Spec Sheet

 

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

PLA 132

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

PLA 181

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PLA 191

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PLA 251

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PLA 411

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. Arm Orientation: Standard double arm orientation is 180°. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PLA 421

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PLA 441

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PLA 451

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.

PLA 521

Spec Sheet

Specifications & Features

Pemco Decorative Arms are constructed from aluminum sand castings. Castings are welded and heat treated after weld to a T6 hardness for maximum strength. For all wall mounted arms, back plates are NOT pre-drilled at the factory. This allows installation contractors the ability to match mounting holes (by contractor) to specified mounting surfaces. For post/pole mounted arms, a standard 3” x 5.5” tenon is required (Pemco’s T355). Arm Orientation: Standard double arm orientation is 180°. Standard quadruple arm orientation is 90°. For triple arm configuration or custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty.