Showing all 48 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Emergency/Exit Light +

Goosenecks +

Pole Diameter +

Pole Height +

Basal Wall

Spec Sheet

 

Specifications & Features

Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Cav 13W & 14W

Spec Sheet

IES Files - Cav 13 IES Files - Cav 14

Specifications & Features

Housing: Die Cast Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Flat Top, Sealed Driver Compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Inner Lens to Seal LED Array. Mounting Options: Mount over a 4″ Recessed Outlet Box. Radiant™ LED: Aluminum Boards Wattage: Array: 16.6w, System: 20.2w (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60H; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +40°C Environment.

CAV 15-W

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Sealed Driver Compartment. 360° Distribution, or 120° or 180° Shield. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Over a 4˝ Recessed Outlet Box. EasyLED LED: Aluminum Boards Wattage: 360° Arrays: 12w & 16.6w, System: 12.9w & 18.9w 180° & 120° Arrays: 10w & 15.5w, System: 11.2w & 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

CAV15-D

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Sealed Driver Compartment. 360° Distribution, or 120° or 180° Shield. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Over a 4˝ Recessed Outlet Box. EasyLED LED: Aluminum Boards Wattage: 360° Arrays: 12w & 16.6w, System: 12.9w & 18.9w 180° & 120° Arrays: 10w & 15.5w, System: 11.2w & 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Compass Up and Down

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lenses. Reflector: Wide, Medium and Narrow Distributions. Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Cool Copper COB Wattage: COB 40w, System Input 40w (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Compass Up or Down

Spec Sheet IES Files

Specifications & Features

Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Reflector: Wide, Medium and Narrow Distributions. Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Cool Copper COB Wattage: COB 20w, System Input 21w (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +50°C Environment. LM-79 Report Available on Select Models.

Crest 12

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 15w, System: 15.8w; (150w HID Equivalent) Array: 21.7w, System: 23.7w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 15

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: 25w Array: 24.78w, System: 27.1w; (175w HID Equivalent) 37w Array: 37.2w, System: 40.6; (250w HID Equivalent) 50w Array: 50w, System: 54.2w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 17

Spec Sheet Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs, Stainless Steel Hinge Pins, Safety Cable to Prevent Glass Impact During Installation, Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Prismatic Borosilicate Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 37.2w, System: 44w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 20

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. EasyLED LED: Aluminum Boards Wattage: Array: 37w, System: 40.6w; (250w HID Equivalent) Array: 55.8w, System: 60.9w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 34

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing, Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED Low Profile LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Included Easy-Hang Bracket Fits Standard 4" Electrical Box, Allowing One-Person Installation. EasyLED LED: Aluminum Boards Wattage: Array: 34w, System: 38.9w; (100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 4kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 35

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. EasyLED LED: Aluminum Boards Wattage: Array: 46.5w, System: 52w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.

Crest 36

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Meets Dark Sky Requirements. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. EasyLED LED: Aluminum Boards Wattage: Array: 46.5w, System: 52w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment

Crest 44

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame, Integral Heat Sinking and Driver Compartment. Twist-Lock Photocell/Smart Controls Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded Type IV Polycarbonate Lens. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. Optional Trim Plate is Available for Use in Retrofit Applications to Cover Wall Surface Blemishes. EasyLED LED: Aluminum Boards Wattage: 25w: Array: 24.9w, System: 28.4w (100w HID Equivalent) 37w: Array: 37.3w, System: 41.8w (175w HID Equivalent) 81w: Array: 80.8w, System: 83.7w (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 25w, 6kV for 37 and 81w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Crest 45

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing with Full Cutoff Front Frame, Integral Heat Sinking and Driver Compartment. Polycarbonate Vandal-Resistant Lens Area on Housing for Use with Microwave Sensors. Twist-Lock Photocell/Smart Controls Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded Type IV Polycarbonate Lens. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. Optional Trim Plate is Available for Use in Retrofit Applications to Cover Wall Surface Blemishes. LED: Aluminum Boards - +/- 300K per CCT Wattage: 81w: Array: 80.8w, System: 92.8w (175w HID Equivalent) 112w: Array: 111.9w, System: 131w (250w HID Equivalent) 174w: Array: 174.1w, System: 187.5w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, Dimmable Driver. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 15 Wall

Spec Sheet Optimized Spec Sheet

IES Files Optimized IES Files Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w; (Up to 175w HID Equivalent.). Optimized version: 56w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 25 Wall

Spec Sheet IES Files

Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). EasyLED LED: Aluminum Boards Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (81w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Eagle 45 Wall

Spec Sheet IES Files

Spec Sheet (Twin) Product Brochure

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass, or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) EasyLED LED: Aluminum Boards Wattages: Multiple Wattages Available: 99w, 111w, 133w, 136w, 167w, 183w, 199w, 225w, 256w, 272w, 290w, 315w Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Emergency Exit Light

Spec Sheet

Specifications & Features

Illumination: Long-Life, efficient Ultra-Bright White LED; Mirror-Bright Reflector and Prismatic polycarbonate refractor Electrical: Dual 120/277 Voltage; Charge rate/power “ON” LED indicator light and push-to-test switch for mandated code compliance testing; Long-life, maintenance-free, rechargeable NiCd battery; Internal solid-state transfer switch automatically connects the internal battery to LED lamp heads for minimum 90-minute emergency illumination; Fully automatic solid-state, two-rate charger initiates battery charging to recharge a discharged battery in 24 hours.; Self-diagnostic test feature continually diagnoses unit’s performance and tests system to ensure reliable operation and to meet electrical and life safety codes Mounting: Surface mount via easy connect back plate that fits most standard size junction boxes; Conduit mount via rigid conduit entry provision on top of the unit Housing: Decorative, low-profile, architectural design; Die-cast aluminum housing; Durable powdercoated finishes in white, black and dark bronze; Sealed and gasketed Warranty/Listing: Five year warranty on all electronics and housing. Battery pro-rated for five years; Meets UL924, NFPA 101 Life Safety Code, NEC, OSHA, local and state codes; UL Listed for wet locations

Exit Sign

Spec Sheet

Specifications & Features

  • Fully Automatic Operation • LEDs Have 25+ Year Life • Double Faced
  • Snap Out Arrows
  • Automatic Low Voltage Disconnect
  • Thermoplastic Injection Molded Housing • Push to Test Switch
  • Universal Mounting Canopy for Top/Side
  • Installation
  • 120-277V
  • UL Listed

Hatteras Round Grid Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Grid Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Round Half Cutoff

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Half Cutoff Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Round Open Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Open Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Hatteras Square Grid Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Grid Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Square Half Cutoff

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Half Cutoff Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Hatteras Square Open Frame

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Gasketed Aluminum Open Front Frame and Housing with Integral Heat Sinking and Driver Compartment. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lens Eliminates LED Hot Spots Mounting Options: Surface Mount EasyLED LED: Aluminum Boards Wattage: Array: 12w, System: 12.9w; (100w HID Equivalent) Array: 17w, System: 19.7w; (100w HID Equivalent) Array: 25w, System: 27.1w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz, 347V, 50/60Hz or 480-347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Pastor Wall Mount

Spec Sheet

 

Specifications & Features

Housing: Die Cast Aluminum Housing, Integral Heat Sinking and Driver Compartment, Spun Aluminum Shade. Nickel-Plated Stainless Steel Hardware. Optional Twist-Lock Receptacle and Photocells are Installed on Arm Brackets (Factory Installed). Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment Finish: Textured Architectural Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Prismatic or LumaLens Opal Prismatic Array Lens to Seal LED Array Mounting Options: Single Wall Mount Arm and Bracket, or Single or Dual Pole Mount Arms. Pole Mount Arms Accommodate 3” Tenons. EasyLED LED: Aluminum Boards Wattage: 37w Array: 37w, System: 39w; (70-150w HID Equivalent) 65w Array: 65.1w, System: 68w; (150-250w HID Equivalent) 84w Array: 84w, System: 86w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Santa Fe 1 Wall

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Santa Fe 2 Wall

Spec Sheet IES Files

Specifications & Features

Light Engine: Radiant LED; CCT: Amber, LPS, 18K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Stamped and cast aluminum housing and roof. Post top is 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty

Swan 1

Spec Sheet

Specifications & Features

Housing: Heavy Duty Die Cast Aluminum Housing with Integral Heat Sinking, ¾˝ NPS Threaded Mount. Includes Spun Aluminum Shade, Field Removable Listing & Ratings: CSA Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Prismatic Polycarbonate Lens Mounting: Fixed Mount or Adjustable Swivel with ¾˝ NPS Threads. Radiant LED: Aluminum Boards Wattage: Array: 23w, System: 26.3w; (175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment

Swan 2 Angled

Spec Sheet IES Files

Specifications & Features

Housing: Heavy Duty Die Cast Aluminum Housing with Integral Heat Sinking, ¾˝ NPS Threaded Mount. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Flat Clear Tempered Glass Lens Mounting Options: Fixed Mount Radiant LED: Aluminum Boards Wattage: Array: 23w, System: 27w(175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Swan 2 No Shade

Spec Sheet IES Files

Specifications & Features

Housing: Heavy Duty Die Cast Aluminum Housing with Integral Heat Sinking, ¾˝ NPS Threaded Mount. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Flat Clear Tempered Glass Lens Mounting Options: Fixed Mount Radiant LED: Aluminum Boards Wattage: Array: 23w, System: 27w(175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Swan 2 Straight

Spec Sheet IES Files

Specifications & Features

Housing: Heavy Duty Die Cast Aluminum Housing with Integral Heat Sinking, ¾˝ NPS Threaded Mount. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Flat Clear Tempered Glass Lens Mounting Options: Fixed Mount Radiant LED: Aluminum Boards Wattage: Array: 23w, System: 27w(175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Swan 3

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame with Separate Ballast Compartment. Integral Heat-Dissipating Fins for Thermal Management. ½˝ Threaded Aperture with Liquid-Tight Connector. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. IP66 Sealed LED Compartment. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Flat Glass Lens. Mounting: Adjustable Knuckle with ½˝ NPS Threads. COB LED: LED COB Wattage: LED: 1 x 18w; System: 21w (70w HID Equivalent Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Current is 150 Microamps. Warranty: 5-Year Warranty for -30 to 50ºC Environment.

Swan 4

Spec Sheet

Specifications & Features

Housing: Die-Cast Gasketed Aluminum Housing and Front Frame with Integral Heat-Dissipating Fins for Thermal Management. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting: Adjustable Knuckle with ½˝ NPS Threads. COB LED: Cool Copper COB Wattage: 20w: COB: 20w, System: 21w(100w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment. See Page 3 for Projected Lumen Maintenance Table.

Swan 5

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat or SoftLED Flat Glass Lens Mounting Options: Adjustable Knuckle with ½˝ NPS Threads. Radiant LED: Aluminum Boards Wattage:22w: Array: 21.7w, System: 23.8w; (Up to 100w HID Equivalent.) 37w: Array: 37.2w, System: 43w (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty:5-Year Warranty for -40°C to +50°C Environment.

Swan 6

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing and Top Frame. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens Mounting: Adjustable Knuckle with ½˝ NPS Threads. Radiant LED: Aluminum Boards Wattage: 22w: Array: 22w, System: 26.4w; (70w HID Equivalent) 37w: Array: 37.2w, System: 43.4w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment. See Page 3 for Projected Lumen Maintenance Table.

Torpedo 8″

Spec Sheet

Specifications & Features

Radiant™ LED
  • Conformal Coating LED light engine
  • CCT: Amber, LPS (1800K), 2200K, 2700K, 3000K, 4000K, 5000K
  • Static Colors Available - Contact Factory
Optical
  • V
Electrical
  • Electronic Driver, 120-277V, 50/60Hz or
347/480V, 50/60Hz
  • 0-10v Dimmable Driver
  • Standard Surge Protection included (6kV lineline; 10k-V line-earth)
Housing Eight inch decorative aluminum tube with cast arm and wall plate. Finish
  • Super durable polyester powder coat finish.
  • Custom finishes available, including patinas and all RAL colors
Listing & Ratings
  • ETL listed to UL 1598 standard for wet location • LED is IP66 Rated
Warranty
  • 5 year limited warranty

Trek 30Q

Spec Sheet

Specifications & Features

Housing: Die Cast Aluminum Housing with Integral Heat Sinking. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded UV-Stabilized Polycarbonate or SoftLED LumaLens UV-Stabilized Polycarbonate Opal Vandal-Resistant Lenses to Seal LED Array. Mounting Options: Mount Directly Over a 4˝ Recessed Outlet Box, Includes Easy-Hang “Two Hands Free” Wall Mounting Bracket with Built-In Level. No Surface Conduit Entrance. EasyLED LED: Aluminum Boards Wattage: 14w: Array: 14.5w, System: 16.1w 22w: Array: 21.7w, System: 24.8w Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

UR2A

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing and Top Frame. Can Be Tapped for Side Conduit Entry. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. ADA Compliant (Without Brackets) Finish: Gray Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens Mounting Options: Surface Mount or Use Optional Stainless Steel Quick-Mount Bracket, Adjustable Bracket, or Yoke. Radiant™ LED: Aluminum Boards Wattage: 47w: Array: 47w, System: 57.8w; (175w HID Equivalent) 66w: Array: 66w, System: 77.3w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment

UR4A

Spec Sheet IES Files

Specifications & Features

Housing: Heavy-Duty Die Cast Aluminum Housing and Top Frame. Can Be Tapped for Side Conduit Entry. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. ADA Compliant (Without Brackets) Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate or SoftLED LumaLens Opal Polycarbonate Vandal-Resistant Lens Mounting Options: Surface Mount or Use Optional Stainless Steel Quick-Mount Bracket, Adjustable Bracket, or Yoke. Radiant™ LED: Aluminum Boards Wattage: 112w: Array: 112w, System: 126w; (250w HID Equivalent) 136w: Array: 136w, System: 152w; (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.

Wedge – Large

Spec Sheet IES Files

Specifications & Features

Housing: Die-Cast Gasketed Aluminum Housing, Includes Cast-In Box Template and Built in Level. White Reflector Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount Directly Over Recessed Electrical Box or Use ½″ Surface Conduit. COB LED: Cool Copper COB Wattage: 60w: COB 60w, System Input 56w (250w HID Equivalent) 80w: COB 80w, System Input 80w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +50°C Environment. LM-79 Report Available on Select Models

Wedge – Small

Spec Sheet IES Files

Specifications & Features

Housing: Die-Cast Gasketed Aluminum Housing, Includes Cast-In Box Template and Built in Level. White Reflector. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount Directly Over Recessed Electrical Box or use ½˝ Surface Mount Conduit. Adjustable Knuckle with ½˝ NPS Threads, Sold Separately, Field Installed. COB LED: QSSI Cool Copper COB Wattage: 20w COB: 20w, System: 21w; (100w HID Equivalent) Note: 12V Model is 20w only. 40w COB 40w, System: 43w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; 347-480V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 20w, 6kV for 40w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. 12V: Electronic Driver, 12-17VAC Input, 50/60Hz, Non-Dimmable (20w Model Only) Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment