Showing all 7 results

show blocks helper

Wattage +

Distribution +

Full Cut-Off +

CCT +

C1D2 Compliant +

Quick Ship +

Driver +

Globe/Lens +

Controls & Options +

Finish +

Light Columns +

Pillar Tops +

Bollard Retrofit Kit +

Bolt Circle Size +

Emergency/Exit Light +

Goosenecks +

Pole Diameter +

Pole Height +

20′ to 50′ Round Tapered Smooth Aluminum

Spec Sheet

Specifications & Features

  • 20’ to 50’ mounting heights
  • For single or multiple luminaire mounting
  • Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications Shaft: Structural Base A356 alloy sand cast aluminum, four bolt base. An extra large access cover is included. A grounding lug is also provided. Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 5” and 6” diameter standard measures 3” x 5”. The opening in the 7”, 8” and 10” diameter standard measures 4” x 6”. An optional 4” x 8” opening is available for 8” and 10” diameter standards. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
    • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
    • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
    • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).

8′ to 16′ Round Straight Aluminum Direct Burial

Spec Sheet

Specifications & Features

  • 8’ to 16’ mounting heights
  • For single or multiple luminaire mounting
  • Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
Shaft: Direct Embedment: Unless otherwise specified, the length of the embedded section of a 4” diameter is 3’, and a 5” shaft is 4’. A 1 1/2” diameter grometted wire inlet hole located 1’ 6” below grade is included. Ground Lug: The ground lug is a tab that is welded to the inside of the shaft, has a tapped 3/8” –16 hole to accommodate the ground connector, and is located opposite the hand hole or wire inlet hole. Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 4” is 2 1/2” x 5” and opening in the 5” diameter standard measures 3” x 5”. Anti-Rotation Device: Standard on all Direct Burial poles. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
  • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).

8′ to 18′ Round Tapered Smooth Aluminum

Spec Sheet

Specifications & Features

  • 8’ to 18’ mounting heights
  • For single or multiple luminaire mounting
  • Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications Shaft: Structural Base A356 alloy sand cast aluminum, four bolt base. An extra large access cover is included. A grounding lug is also provided. Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 7” diameter standard measures 4” x 6”. The opening in the 4” diameter standard measures 2 3/8” x 4 1/2”. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
    • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
    • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
    • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).

8′ to 30′ Round Straight Aluminum

Spec Sheet

Specifications & Features

  • 8’ to 30’ mounting heights
  • For single or multiple luminaire mounting
  • Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications Shaft: Structural Base A356 alloy sand cast aluminum, four bolt base. An extra large access cover is included. A grounding lug is also provided. Handholes: All standards in this model range include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 4 1/2”, 5” and 6” diameter standard measures 3” x 5”. The opening in the 4” diameter standard measures 2 3/8” x 4 1/2” Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
    • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
    • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
    • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).

8′ to 30′ Round Tapered Aluminum Direct Burial

Spec Sheet

Specifications & Features

  • 8’ to 16’ mounting heights
  • For single or multiple luminaire mounting
  • Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
Shaft: Direct Embedment: Unless otherwise specified, the length of the embedded section of a 4”diameter is 3’, 5” and 6” shaft is 4’, and 7” and 8” shaft is 5’. A 1 1/2” diameter grometted wire inlet hole located 1’ 6” below grade is included. The embedded section of the standard is coated inside and outside with zinc-rich paint. Ground Lug: The ground lug is a tab that is welded to the inside of the shaft, has a tapped 3/8” –16 hole to accommodate the ground connector, and is located opposite the hand hole or wire inlet hole. Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 5” and 6” diameter standard measures 3” x 5”. The opening in the 7”, 8” and 10” diameter standard measures 4” x 6”. An optional 4” x 8” opening is available for 8” and 10” diameter standards. Anti-Rotation Device: Standard on all Direct Burial poles. Finish: Super Durable Polyester TGIC Powder Coat
  • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
  • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
  • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).

8′ to 35′ Square Straight Aluminum

Spec Sheet

 

Specifications & Features

  • 8’ to 35’ mounting heights
  • For single or multiple luminaire mounting
  • Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications Shaft: Structural Base A356 alloy sand cast aluminum, four bolt base. An extra large access cover is included. A grounding lug is also provided. Handholes: All square standards include a peripherally reinforced surface-mounted covered handhole centered 18” above the bottom of the standard. The opening is rectangular in shape with the major dimensions along the vertical axis. The opening in the 4” square standards is 2” x 4” and the 5” and 6” square standards are 2 1/2” x 4”. Handholes with larger openings may be available as an option. Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer. Finish: Super Durable Polyester TGIC Powder Coat
    • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
    • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
    • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).

PSRA – 10′-25′ Stocked Round Straight Aluminum

Spec Sheet

 

Specifications & Features

The Pole Shaft is of Uniform Wall Thickness and is One-Piece Extruded 6063 Aluminum Alloy With T6 Temper, Available in 4˝ and 5˝ Diameters. Anchor Base is Die Cast From 356 Alloy Aluminum and is Heat Treated to a T6 Temper After Welding. Wall Thickness: 5mm (.196˝). Finish: Textured Architectural Black Powdercoat Finish, Baked to Ensure Maximum Paint Adhesion, Hardness and Durability. Anchor Bolts: Anchor Bolts are Included, Sized Based on Pole Data Charts for the Selected Pole Size. Hand Hole: Die Cast Aluminum Reinforced Hand Hole and Cover with Ground Screw Base Cover: Poles are Provided with a Two-Piece Formed Aluminum Base Cover that is Easily Assembled and Fitted Over Pole Base. Pole Length: Poles are Available in Standard Lengths as Shown in the Order Matrix. Poles can be Custom Cut to Order. Consult Factory. Mounting Options: Available Side Drilled for [email protected] Degrees or [email protected] Degrees, Includes Polycarbonate Top Cover (4” Only) and Hole Plugs for Unused Drilling Locations.