AmberLED UR4AOQ

Spec Sheet

Housing:
Heavy-Duty Die Cast Aluminum Housing and Top Frame. Can Be Tapped for Side
Conduit Entry.
Listing & Ratings:
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. Note: If using the Quick-Mount
Bracket, the power feed must be made at the drill point locations on the sides of the
fixture, not through the Bracket to maintain the Wet Locations listing.
IP66 Sealed LED Compartment.
Finish:
Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon
Request.
Lens:
Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens
Mounting Options:
Surface Mount or Use Optional Stainless Steel Quick-Mount Bracket, Adjustable Bracket,
or Yoke.
AmberLED LED:
Aluminum Boards
Wattage:
Array: 87w, System: 93w; (150-250w HID Equivalent)
Driver:
Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard
Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100%
to 10%; Dimming Source Current is 150 Microamps.
Controls:
Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for
Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface
of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory.
Fixtures are Tested with Pemco Controls and May Not Function Properly With Controls
Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
Warranty:
5-Year Warranty for -40°C to +50°C Environment.
See Page 2 for Projected Lumen Maintenance Table.