Decorative Luminaire Mounting Device

Arms are constructed out of cast aluminum and are available in 48”, 72” or 96”. Mounting: Arms are mounted directly to the pole using hex head bolts and washers. Poles provided by Pemco Lighting will be machined with heavy duty threaded nutserts installed by the factory before finish. Requirements: Decorative Luminaire Mounting Device (ordered separately on the last page) is required for this arm. This device is used for pendant mounted fixtures only. Horizontally mounted fixtures fit directly to a 23/8” slip fitter. Arm Orientation: Standard double arm orientation is 180°. For custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

Quick view

Sold out

Close

PLA 908

Spec Sheet

Specifications & Features

Arms are constructed out of cast aluminum and are available in 48”, 72” or 96”. Mounting: Arms are mounted directly to the pole using hex head bolts and washers. Poles provided by Pemco Lighting will be machined with heavy duty threaded nutserts installed by the factory before finish. Requirements: Decorative Luminaire Mounting Device (ordered separately on the last page) is required for this arm. This device is used for pendant mounted fixtures only. Horizontally mounted fixtures fit directly to a 23/8” slip fitter. Arm Orientation: Standard double arm orientation is 180°. For custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

Quick view

Sold out

Close

Flower Hanger

Spec Sheet

Specifications & Features

Construction: The Flower/Plant Hanger is welded or threads into a mounting plate or a post clamp. All welding is per ANSI/AWS D1.2-90. All welders are certified per ANSI/AWS D1.2-90 Section 5. Materials: The end caps and clamp-ons are copper-free cast aluminum produced from certified ASTM ingot. The hanger and mounting plate are aluminum, ASTM 6061, heat treated to a T6 temper. All hardware is stainless steel. Installation: Pemco’s Flower/Plant Hangers are round extruded schedule 80 aluminum pipe with removable cast aluminum end cap. The bolt-on hanger bolts to a mounting channel on the side of the post with four stainless steel screws. The clamp-on mountings clamp around the post, secured with two 1/4” hex head stainless steel bolts. (Post diameter at mounting point must be specified.) Clamp mounts feature the same basic coupling for 4” and 5”, and are also available in a custom size for larger poles. Each Flower/Plant Hanger includes one eyebolt. Hangers are not designed for pedestrian interference. Dimensions: Flower/Plant Hangers are available in 3/4” SCH 80 Pipe (1.05 OD). Standard length is 24”. Custom lengths are available (must be specified at time of order). Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

Quick view

Sold out

QUICK SHIP

Close

Banner Arm Light

Spec Sheet IES Files

Specifications & Features

Housing: Die Cast and Extruded Aluminum Housing with Separate Driver Compartment in Mounting Arm. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Extrusion. Finish: Textured Architectural Black Powdercoat Finish. Wiring: Includes 15´ 3-Wire Cord. Mounting Options: 4″ or 5″ Die Cast Aluminum Pole Clamps COB LED: LED COB Wattage: LED: 2x5w; System: 10w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Provided with Factory-Installed Photocell That is Internally Wired for Switching Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -30°C to +50°C Environment.

Quick view

Sold out

Close

PLA 906

Spec Sheet

Specifications & Features

Arms are constructed out of cast aluminum and are available in 48”, 72” or 96”. Mounting: Arms are mounted directly to the pole using hex head bolts and washers. Poles provided by Pemco Lighting will be machined with heavy duty threaded nutserts installed by the factory before finish. Requirements: Decorative Luminaire Mounting Device (ordered separately on the last page) is required for this arm. This device is used for pendant mounted fixtures only. Horizontally mounted fixtures fit directly to a 23/8” slip fitter. Arm Orientation: Standard double arm orientation is 180°. For custom orientation, please contact the factory. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

Quick view

Sold out

Close

Flag Pole Holder

Spec Sheet

Specifications & Features

Materials: Flagpole holders consist of a one piece aluminum alloy tubing welded at a 45° angle to a mounting foot. Flagpole holders are heat treated to a T6 hardness for maximum strength. All hardware is stainless steel. Holders are 1” OD. Contact the factory for custom options. Installation: The bolt-on flagpole holders (FPH-1-BO) bolt to the side of the post with four stainless steel screws. Location must be specified. Clamp-on mountings (FPH-1-CO) clamp around the post (4” or 5” OD) and are secured with two 1/4” stainless steel bolts. Post diameter at mounting point must be specified. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

Quick view

Sold out

Close

PLA 932

Spec Sheet

Specifications & Features

Arms are constructed out of cast aluminum . Mounting (chosen when ordering the pole): Tall tenon (Pemco's T355) for a step transition or a Sleeve (Pemco's SLV) for a smooth transition. Arm Orientation: Standard double arm orientation is 180°. Standard quadruple orientation is 90°. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty

Quick view

Sold out