OptiMAX EasyLED Harsh Environment High Bay

Specifications & Features

Spec Sheet

IES Files

Housing:
Heavy-Duty Die Cast Aluminum Housing construction with silicone gaskets and stainlesssteel
fasteners. Drivers, sensors, and battery backup are mounted on internally for easy
maintenance.
Listing & Ratings:
ETL: Listed for Wet Locations, ANSI/UL 1598, 8750. IP66 Sealed LED Compartment,
Pressure wash rated to 1400 PSI.
Finish:
Powdercoat Finish Over a Chromate Conversion Coating.
Lens:
Clear UV-Stabilized Polycarbonate or Optional DR Acrylic Lens. Medium Distribution (80˚
Beam).
Mounting Options:
Pendant Mount Using Die Cast Aluminum Captive Hook.
EasyLED LED:
Aluminum Boards
Wattage:
100w, 150w, 200w, or 240w Array
Power Input:
Includes 6’ Yellow Cable (5-Conductor Wire to Pigtails)
(Black, White, Green, Purple, Gray)
Driver:
Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD
and PF>0.90. Standard Internal Surge Protection 4KV to 6kV depending on wattage.
0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source
Current is 150 Microamps.
Controls:
Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for
Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface
of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory.
Fixtures are Tested with Pemco Controls and May Not Function Properly with Controls
Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.