Sold out
Related products
Tenon Adaptor
Spec Sheet
Specifications & Features
Materials: Tenon Adaptors are constructed of aluminum. All hardware is stainless steel. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty
Pole Options
Spec Sheet
Spec shows different options for poles including:- Sleeves
- Tenons
- Tenon Adaptors
- Plant/Flower Hangers
- GFI Covers
- USB Ports
- Direct Burial Shafts
- Flag Holders
- Eyebolts
- Finials
Flower Hanger
Spec Sheet
Specifications & Features
Construction: The Flower/Plant Hanger is welded or threads into a mounting plate or a post clamp. All welding is per ANSI/AWS D1.2-90. All welders are certified per ANSI/AWS D1.2-90 Section 5. Materials: The end caps and clamp-ons are copper-free cast aluminum produced from certified ASTM ingot. The hanger and mounting plate are aluminum, ASTM 6061, heat treated to a T6 temper. All hardware is stainless steel. Installation: Pemco’s Flower/Plant Hangers are round extruded schedule 80 aluminum pipe with removable cast aluminum end cap. The bolt-on hanger bolts to a mounting channel on the side of the post with four stainless steel screws. The clamp-on mountings clamp around the post, secured with two 1/4” hex head stainless steel bolts. (Post diameter at mounting point must be specified.) Clamp mounts feature the same basic coupling for 4” and 5”, and are also available in a custom size for larger poles. Each Flower/Plant Hanger includes one eyebolt. Hangers are not designed for pedestrian interference. Dimensions: Flower/Plant Hangers are available in 3/4” SCH 80 Pipe (1.05 OD). Standard length is 24”. Custom lengths are available (must be specified at time of order). Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty
Button Eye Photo Control
Spec Sheet
Features:- Dusk-to-dawn control of outdoor lighting
- Floodlights and security lighting
- Ideal for LED fixtures totaling 1650 W @ 277 VAC
- Non-drifting silicon light sensor IR filtered for human eye response
- Zero-cross technology helps device withstand severe inrush current and extends relay life
- Exceeds 10,000 ON/OFF operations at full load to match life expectancy of LED fixtures
- All components meet 15-year life requirements
Flag Pole Holder
Spec Sheet
Specifications & Features
Materials: Flagpole holders consist of a one piece aluminum alloy tubing welded at a 45° angle to a mounting foot. Flagpole holders are heat treated to a T6 hardness for maximum strength. All hardware is stainless steel. Holders are 1” OD. Contact the factory for custom options. Installation: The bolt-on flagpole holders (FPH-1-BO) bolt to the side of the post with four stainless steel screws. Location must be specified. Clamp-on mountings (FPH-1-CO) clamp around the post (4” or 5” OD) and are secured with two 1/4” stainless steel bolts. Post diameter at mounting point must be specified. Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty
3-Pin Twist Lock Receptable
Spec Sheet
Features:- 12˝ (180mm) Leads, AWG# 14, AWM1015
- UL773/ANSI C136.10-1996 Receptacle
- Phenolic Socket
- Includes ABS Housing
- 480V Max., 15 Amp Max
- Input Voltage: 480VAC
- Ambient Temperature: -40˚F ~ +176˚F
- Relative Humidity: 99%
- Listing: UL Recognized Component Mark
