CCT | |
---|---|
Controls & Options | |
Distribution | |
Driver | |
Quick Ship | |
Wattage | |
Globe/Lens |


SeaStar 10 Post Top
Spec Sheet
Specification and Features:
Housing: Die Cast Aluminum Housing, Integral Heat Sinking.
Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment.
Finish: Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Array Lens with Integral Optics. Gasketed to Seal LED Array. Optional SoftLED Opal UV-Stablized Polycarbonate Vandal-Resistant Lens Available.
Mounting: Post Top Accommodates “P3″ 2⅞” O.D. x 3″ Tenon.
EasyLED LED: Aluminum Boards
Wattage:
10w Array: 10w, System: 10.3w; (50w HID Equivalent)
19w Array: 19w, System: 20.5w; (170w HID Equivalent)
28w Array: 28w, System: 30.8w; (100w HID Equivalent)
Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz (28w Model Only); Less
Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired
Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
Warranty: 5-Year Warranty for -40°C to +50°C Environment.