Wood Finish Square Poles

Spec Sheet

Specifications and Features:
• 8’ to 18’ standard mounting heights.
• For single or multiple luminaire mounting.
• Luminaires may be mounted on tenons, pendant or shaft may be drilled to manufacturer’s mounting specifications.

Structural Base
A356 alloy sand cast aluminum, four bolt base. Bolt covers are provided.

Handholes
All square standards include a peripherally reinforced surface-mounted covered handhole centered 18” above the bottom of the standard. The opening is rectangular in shape with the major dimensions along the vertical axis. The opening in the 4” square standards is 2” x 4” and the 6” square standards is 2½” x 4”. A grounding lug is also provided.

Tenons
T300=Standard for post top (27/8” OD x 3” tall)
T355=Standard for shepherd’s crook arms (27/8” OD x 5.5” tall)
CAP=Removable cap, no tenon

Anchor Bolts
Standard with each pole: includes four steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer.

Options (Factory Installed)
WAM (SA or DA)=Single or double wood grain finish arm assembly, to match pole finish
GFIC=Weatherproof GFI in-use cover, cast aluminum*
GFIP=Weatherproof GFI in-use cover, plastic*
SBC=Spun Base Cover
USB=Dual USB Port*
*Must indicate location (See Orientation Guide on last page)

Finish
Super durable polyester TGIC powder coat with wood grain finish. Standard finishes: Natural Wood, Cedar, Dry Birch, and Walnut for pole and arem. Standard finishes for accents