10′ to 30′ Round Straight Smooth Steel
Spec Sheet
Specifications & Features
The pole shaft is fabricated from hot rolled welded steel tubing of one-piece construction with a minimum yield strength of 42 KSI. Pole Top: A removeable pole cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies. For top mount luminaires and/or bracket, consult factory. If purchasing your luminaires from someone other than Pemco, you must consult the manufacturer for correct tenon size or drill pattern. Other pole top options include pole cap only (PC) or plain top (PL) which is typical when the pole top diameter matches the necessary slip fit dimensions. Handhole: A reinforced handhole with grounding provision is provided at 1’-0” from the base end of the pole assembly. Each handhole includes an easy to install, self-contained Swing Latch handhole cover assembly. U.S. Patent Swing Latch cover is fabricated from durable polycarbonate/ABS blend plastic. All pole assemblies are provided with a 2.50” x 5.00” rectangular handhole. Handhole dimensions are nominal. Base Cover: A two-piece full base cover fabricated from ABS plastic is provided with each pole assembly. Additional base cover options, including the dart round (DT) cast aluminum cover, are available (adder). Anchor Bolts: Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end. Hardware: All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel. Finish: Super Durable Polyester TGIC Powder Coat • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
10′ to 40′ Square Straight Smooth Steel
Spec Sheet
Specifications & Features
The pole shaft is fabricated from hot rolled welded steel tubing of one-piece construction with a minimum yield strength of 55 KSI. Pole Top: A removeable pole cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies. For top mount luminaires and/or bracket, consult factory. If purchasing your luminaires from someone other than Pemco, you must consult the manufacturer for correct tenon size or drill pattern. Other pole top options include pole cap only (PC) or plain top (PL) which is typical when the pole top diameter matches the necessary slip fit dimensions. Handhole: A reinforced handhole with grounding provision is provided at 1’-6” from the base end of the pole assembly. Each handhole includes an easy to install, self-contained Swing Latch handhole cover assembly. U.S. Patent Swing Latch cover is fabricated from durable polycarbonate/ABS blend plastic. All pole assemblies are provided with a 2.50” x 5.00” rectangular handhole. Handhole dimensions are nominal. Base Cover: A two-piece full base cover fabricated from ABS plastic is provided with each pole assembly. Additional base cover options, including the dart round (DT) cast aluminum cover, are available (adder). Anchor Bolts: Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end. Hardware: All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel. Finish: Super Durable Polyester TGIC Powder Coat • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
20′ to 30′ Round Tapered Smooth Steel
Spec Sheet
Specifications & Features
The pole shaft is a one-piece assembly conforming to ASTM A595 Grade A or A572 Grade 55 with a constant linear taper of 0.14 in/ft. Pole Top: Pole is provided with either a tenon top or drilled for fixture mounting. A removeable pole cap is provided for poles receiving drilling patterns for side-mount luminaire arm assemblies. If purchasing your luminaires from someone other than Pemco, you must consult the manufacturer for correct tenon size or drill pattern. Other pole top options include pole cap only (PC) or plain top (PL) which is typical when the pole top diameter matches the necessary slip fit dimensions. Handhole: A reinforced handhole with grounding provision is provided at 1’-6” from the base end of the pole assembly. Each handhole includes a cover and cover attachment hardware. Poles with a 5.90” base diameter are supplied with a 3” x 5” rectangular handhole. All other pole assemblies are provided with a 4” x 6.5” ovalized handhole. Handhole dimensions are nominal. Base Cover: A two-piece full base cover fabricated from ABS plastic is provided with each pole assembly. Pemco reserves the right to provide a two-piece steel full base cover on some applications depending upon the finish requirement and/or pole base diameter. Nut covers can be substituted on most models. Additional base cover options, including the dart round (DT) cast aluminum cover, are available (adder). Anchor Bolts: Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of 12” on the threaded end. Hardware: All structural fasteners are galvanized high strength carbon steel. All non-structural fasteners are galvanized or zinc-plated carbon steel or stainless steel. Finish: Super Durable Polyester TGIC Powder Coat • Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic • Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed • Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).20′ to 50′ Round Tapered Smooth Aluminum
Spec Sheet
Specifications & Features
- 20’ to 50’ mounting heights
- For single or multiple luminaire mounting
- Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
Shaft: Structural Base A356 alloy sand cast aluminum, four bolt base. An extra large access cover is included. A grounding lug is also provided.
Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 5” and 6” diameter standard measures 3” x 5”. The opening in the 7”, 8” and 10” diameter standard measures 4” x 6”. An optional 4” x 8” opening is
available for 8” and 10” diameter standards.
Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer.
Finish: Super Durable Polyester TGIC Powder Coat
- Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
- Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
- Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
3-Pin Twist Lock Receptable
Spec Sheet
Features:- 12˝ (180mm) Leads, AWG# 14, AWM1015
- UL773/ANSI C136.10-1996 Receptacle
- Phenolic Socket
- Includes ABS Housing
- 480V Max., 15 Amp Max
- Input Voltage: 480VAC
- Ambient Temperature: -40˚F ~ +176˚F
- Relative Humidity: 99%
- Listing: UL Recognized Component Mark
7-Pin Twist Lock Receptable
Spec Sheet
Features:- UL773/ANSI C136.10-2006 Receptacle
- ANSI C136.41-2013 Dimming Control Between an External Locking Type Photocontrol and Ballast or Driver
- UV Stabilized Polycarbonate
- 12″ #14 AWG AWM1015 (Power Leads); 12″ #18 AWG, AWM1015 (Signal Leads)
- 30 VDC, 0.25A Max Signal Loading
- Signal Contacts (4) - Nickel Plated Phosphor Bronze, Gold Plated
- Skirt Gasket to Achieve IP65 Rating
- Input Voltage: 480VAC
- Ambient Temperature: -40˚F ~ +176˚F
- Relative Humidity: 99%
- Listing: UL Recognized Component Mark
8′ to 16′ Round Straight Aluminum Direct Burial
Spec Sheet
Specifications & Features
- 8’ to 16’ mounting heights
- For single or multiple luminaire mounting
- Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
- Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
- Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
- Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
8′ to 18′ Round Tapered Smooth Aluminum
Spec Sheet
Specifications & Features
- 8’ to 18’ mounting heights
- For single or multiple luminaire mounting
- Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
Shaft: Structural Base A356 alloy sand cast aluminum, four bolt base. An extra large access cover is included. A grounding lug is also provided.
Handholes: All standards include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 7” diameter standard measures 4” x 6”. The opening in the 4” diameter standard measures 2 3/8” x 4 1/2”.
Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer.
Finish: Super Durable Polyester TGIC Powder Coat
- Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
- Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
- Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
8′ to 30′ Round Straight Aluminum
Spec Sheet
Specifications & Features
- 8’ to 30’ mounting heights
- For single or multiple luminaire mounting
- Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
Shaft: Structural Base A356 alloy sand cast aluminum, four bolt base. An extra large access cover is included. A grounding lug is also provided.
Handholes: All standards in this model range include a peripherally reinforced flush covered handhole centered 18” above the bottom of the standard. The opening in the 4 1/2”, 5” and 6” diameter standard measures 3” x 5”. The opening in the 4” diameter standard measures 2 3/8” x 4 1/2”
Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer.
Finish: Super Durable Polyester TGIC Powder Coat
- Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
- Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
- Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
8′ to 30′ Round Tapered Aluminum Direct Burial
Spec Sheet
Specifications & Features
- 8’ to 16’ mounting heights
- For single or multiple luminaire mounting
- Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
- Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
- Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
- Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
8′ to 35′ Square Straight Aluminum
Spec Sheet
Specifications & Features
- 8’ to 35’ mounting heights
- For single or multiple luminaire mounting
- Luminaires may be mounted on tenons, brackets or shaft may be drilled to manufacturer’s mounting specifications
Shaft: Structural Base A356 alloy sand cast aluminum, four bolt base. An extra large access cover is included. A grounding lug is also provided.
Handholes: All square standards include a peripherally reinforced surface-mounted covered handhole centered 18” above the bottom of the standard. The opening is rectangular in shape with the major dimensions along the vertical axis. The opening in the 4” square standards is 2” x 4” and the 5” and 6” square standards are 2 1/2” x 4”. Handholes with larger openings may be available as an option.
Anchor Bolts: Standard with each pole: includes four 3/4–10 x 25” steel hot dip galvanized anchor bolts each with two nuts, two flat washers and one lock washer.
Finish: Super Durable Polyester TGIC Powder Coat
- Standard finishes: high gloss black, textured black, high gloss white, medium bronze, dark bronze, green, gray, silver metallic
- Premium finishes (adder): Verde patina, pewter patina, silver sparkle, semi-gloss or matte black, satin brushed
- Custom and Marine-grade finishes are available. All RAL colors are available to match (adder).
AmberLED Cav16
Spec Sheet IES Files
Specifications & Features
Housing: Formed 316L Stainless Steel Housing with Flush Mounting Base & Vandal-Resistant Screws, Domed Top, Internal Ballast Tray for Easy Maintenance. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Style: Specially Designed Aluminum Cone Reflector or Internal Louvers Lens: Clear Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. AmberLED: Aluminum Boards Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
AmberLED Cav17
Spec Sheet IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Domed Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: IES Type III or V Clear Prismatic Borosilicate Glass Refractor, Specially Designed Aluminum Cone Reflector or Internal Louvers Lens: Clear Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. AmberLED: Aluminum Boards Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
AmberLED Cav18
Spec Sheet IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: IES Type III or V Clear Prismatic Borosilicate Glass Refractor, Specially Designed Aluminum Cone Reflector or Internal Louvers Lens: Clear Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. AmberLED: Aluminum Boards Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment
AmberLED Cav19
Spec Sheet IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: IES Type III or V Clear Prismatic Borosilicate Glass Refractor, Specially Designed Aluminum Cone Reflector or Internal Louvers Lens: Clear Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. AmberLED: Aluminum Boards Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
AmberLED Compass Up or Down
Spec Sheet
Specifications & Features
Housing: Extruded Round Aluminum Housing with Built-in Heat Sinks. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Reflector: Wide, Medium and Narrow Distributions. Reflector: Wide, Medium and Narrow Distributions Mounting Options: Mount Over a 4˝ Recessed Outlet Box. COB LED: Amber COB Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Crest12
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 22w, System: 24.8w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
AmberLED Crest15
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Hinged and Gasketed Aluminum Front Frame and Housing with ½” Coin Plugs. Nickel-Plated Stainless Steel Hardware. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens or Tempered Clear Flat Prismatic Glass Lens. Mounting Options: Cast-in Template for Mounting Directly Over a 4˝ Recessed Outlet Box, or Use ½˝ Surface Conduit. AmberLED: Aluminum Boards Wattage: Array: 37w, System: 40w; (250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
AmberLED Delmar 30
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing, Integral Heat Sinking. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Finish: Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Array Lens to Seal LED Array Mounting Options: Included Easy-Hang Bracket Fits Standard 4″ Electrical Box, Allowing One Person Installation. Amber LED: Aluminum Boards Wattage: 78w Array: 77.6w, System: 82w; (150-250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Delmar 55
Spec Sheet IES Files
Specifications & Features
Housing: Low Profile Die Cast Aluminum Housing, ½" Coin Plugs with O-rings for Conduit or External Sensor. Built-in Sensor Housing with Color-Matched Polycarbonate Cover. A Clear Cover will be Provided When a Sensor is Ordered. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. (Damp Locations When Used with VNQM.) IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Molded UV-Resistant Acrylic Optical Lens Designed for Garage Lighting Applications. Mounting Options: Included Easy-Hang Bracket Fits Standard 4" Electrical Box, Allowing One-Person Installation. Optional Quick-Mount/Pendant Bracket Available. AmberLED: Aluminum Boards Wattage: 39w: Array: 39w, System: 43.4w; 52w: Array: 52w, System: 57.2w; (Up to 175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Eagle 15 Area
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment
AmberLED Eagle 15 Flood
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C EnvironmentAmberLED Eagle 15 Wall
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Knuckle, Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 22w: Array: 22w, System: 25.4w; (Up to 100w HID Equivalent.) 37w: Array: 37w, System: 38.2w; (Up to 175w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz (37w Model Only); Less Than 20% THD and PF>0.90. Standard Internal Surge Protection is 2kV for 22w, 6kV for 37w. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment
AmberLED Eagle 25 Area
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 81w: Array: 80.5w, System: 86.6w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Eagle 25 Flood
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 81w: Array: 80.5w, System: 86.6w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.AmberLED Eagle 25 Wall
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, TwoPiece Bracket or Easy Hang Wall Bracket (Factory Installed). AmberLED: Aluminum Boards Wattage: 81w: Array: 80.5w, System: 86.6w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Eagle 45 Area
Spec Sheet
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) Amber LED: Aluminum Boards Wattage: Array: 167.3w, System: 180w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Eagle 45 Flood
Spec Sheet
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) Amber LED: Aluminum Boards Wattage: Array: 167.3w, System: 180w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.AmberLED Eagle 45 Wall
Spec Sheet
Specifications & Features
Housing: Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, Adjustable Slipfitter, 2⅜˝ Diameter Mounting Arm Adapter, Yoke, Two-Piece Bracket or Wall Mount Bracket. (Factory Installed) Amber LED: Aluminum Boards Wattage: Array: 167.3w, System: 180w; (250-400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Eagle 55
Spec Sheet
Specifications & Features
Housing:Die Cast Aluminum Housing and Front Frame, Integral Heat Sinking and Driver Compartment. Photocell Adaptable. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Adjustable Slipfitter. (Factory Installed) Amber LED: Aluminum Boards Wattage: Array: 334w, System: 354w; (Up to 1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Skylight 70RD
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Array Lens to Seal LED Array Mounting Options: Accommodates "P3" 2⅞″ O.D. x 3″ Tenons AmberLED: Aluminum Boards Wattage: 78w Array: 77.6w, System: 82w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment
AmberLED Skylight 71RD
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast Aluminum Housing, Integral Heat Sinking. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Array Lens to Seal LED Array. Prismatic Clear Polycarbonate Vandal-Resistant Outer Conical Lens Mounting Options: Accommodates "P3" 2⅞″ O.D. x 3″ Tenons AmberLED: Aluminum Boards Wattage: 78w Array: 77.6w, System: 82w; (150-250w HID Equivalent.) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED UR4A
Spec Sheet
Specifications & Features
Housing: Heavy-Duty Die Cast Aluminum Housing and Top Frame. Can Be Tapped for Side Conduit Entry. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. ADA Compliant (Without Brackets) Finish: Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Polycarbonate Vandal-Resistant Lens Mounting Options: Surface Mount or Use Optional Stainless Steel Quick-Mount Bracket, Adjustable Bracket, or Yoke. AmberLED LED: Aluminum Boards Wattage: Array: 87w, System: 93w; (150-250w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
AmberLED Wedge
Spec Sheet
Specifications & Features
Housing: Die-Cast Gasketed Aluminum Housing, Includes Cast-In Box Template and Built in Level. White Reflector. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount Directly Over Recessed Electrical Box or use ½˝ Surface Mount Conduit. Adjustable Knuckle with ½˝ NPS Threads, Sold Separately, Field Installed. COB LED: QSSI Cool Copper COB Wattage: COB: 40w, System Input 43w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; 347-480V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.AmberLED Wedge Flood
Spec Sheet
Specifications & Features
Housing: Die-Cast Gasketed Aluminum Housing, Includes Cast-In Box Template and Built in Level. White Reflector. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount Directly Over Recessed Electrical Box or use ½˝ Surface Mount Conduit. Adjustable Knuckle with ½˝ NPS Threads, Sold Separately, Field Installed. COB LED: QSSI Cool Copper COB Wattage: COB: 40w, System Input 43w; (175w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; 347-480V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Argand
Spec Sheet IES Files Argand Brochure
Specifications & Features
Housing: Die Cast Aluminum Housing with Top Glare Shield, Integral Heat Sinking and Driver Compartment. Laser Aiming Bracket is Provided on the Top of the Housing. Heavy Duty Adjustable Yoke Allows for Pole Downward and Ground/Wall Upward Aiming. Nickel-Plated Stainless Steel Hardware. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Gray Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear One-Piece Molded ¼-Section Vandal-Resistant Polycarbonate Lenses in NEMA 2x2, 3x3, 4x4, and 5x5 Distributions. 4 Lenses Per Fixture, with Automatically Applied Closed Cell Gasketing. Mounting Options: Heavy Duty Yoke Allows for Aiming Horizontally and Vertically. Locking Bolts Can Be Configured for Up or Down Aiming. Adjustment Slots are Stamped With Embossed 5 Degree Increment Marks. Fixture is Supplied With 36” Cord and Liquid Tight Connector to Allow for Installation Without Opening the Housing to Make Circuit Connections. Yoke Can Be Bolted to Sports Lighting Cross Arms or Other Structures. Optional Tenon Mount Adaptor Available. LED: Aluminum Boards Wattage: 268w: Array: 268w, System: 294w (Up to 1000w HID Equivalent) 536w: Array: 536w, System: 588w (Up to 1500w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Optional Factory-Installed 5-wire Cord with 1-10V Dimming Conductors are Internally Wired for Downstream Switching and/or 1-10V Dimming Within the Housing. Dimming Response is a Function of the Driver Capability, Consult Factory for Driver Specification for 1-10V Specific Characteristics. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment
Astro 1
Spec Sheet
Specifications & Features
Light Engine: Radiant LED; CCT: Amber, LPS (1800), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Housing: Aluminum housing with 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty
Astro 1 Pendant
Spec Sheet
Specifications & Features
Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Housing: Aluminum housing with 3” fitter. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty
Astro 2
Spec Sheet
Finials & Capitals
Specifications & Features
Light Engine: Radiant LED; CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Decorative cast aluminum capital with acrylic globe Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty
Banner Arm Light
Spec Sheet IES Files
Specifications & Features
Housing: Die Cast and Extruded Aluminum Housing with Separate Driver Compartment in Mounting Arm. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Extrusion. Finish: Textured Architectural Black Powdercoat Finish. Wiring: Includes 15´ 3-Wire Cord. Mounting Options: 4″ or 5″ Die Cast Aluminum Pole Clamps COB LED: LED COB Wattage: LED: 2x5w; System: 10w Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Provided with Factory-Installed Photocell That is Internally Wired for Switching Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -30°C to +50°C Environment.
Banner Arms
Spec Sheet
Specifications & Features
Construction: The banner arm is welded or threads into a mounting plate or a post clamp. All welding is per ANSI/AWS D1.2-90. All welders are certified per ANSI/AWS D1.2-90 Section 5. Materials: The end caps and clamp-ons are copper-free cast aluminum produced from certified ASTM ingot. The banner arm and mounting plate are aluminum, ASTM 6061, heat treated to a T6 temper. All hardware is stainless steel. Installation: Pemco’s banner arms are round extruded schedule 80 aluminum pipe with removable cast aluminum end cap. The bolt-on banner arm bolts to a mounting channel on the side of the post with four stainless steel screws. The clamp-on mountings clamp around the post, secured with two 1/4” hex head stainless steel bolts. (Post diameter at mounting point must be specified.) Clamp mounts feature the same basic coupling for 4” and 5”, and are also available in a custom size for larger poles. A minimum mounting height of 10 feet is recommended for the bottom banner arm. Arms are not designed for pedestrian interference. Bottom eyebolts and banner arms with breakaway couplings are optional and recommended because of the wind load from the banner. Optional eyebolts screw directly into the banner arm. Clampon eyebolts are also available (ordered separately--see page 2). Dimensions: Banner arms are available in 3/4” SCH 80 Pipe (1.05 OD). Standard length is 24”. Custom lengths are available (must be specified at time of order). Finish: Super durable polyester powder coat finish. Custom finishes available, including patinas and all RAL colors. Warranty: 5 year limited warranty
Basal
Spec Sheet
Specifications & Features
Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Basal Flood
Spec Sheet
Specifications & Features
Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.Basal Wall
Spec Sheet
Specifications & Features
Housing: Die Cast Housing with Integral Heat Sinking and Front Frame. Photocell Adaptable. Includes Receptacle and Shorting Cap. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens Mounting Options: Mounts with Eagle Arm, 2⅜˝ Diameter Mounting Arm Adapter, Adjustable Slipfitter, Two-Piece Bracket, Easy Hang Wall Bracket or Wall Mount Box. Photocell Option Not Available When Using WB-Wall Mount Box. (Factory Installed). EasyLED LED: Aluminum Boards Wattage: 56w: Array: 55.8w, System: 60.6w (150w HID Equivalent) 74w: Array: 74.3w, System: 80.8w (250w HID Equivalent) 112w: Array: 111.5w, System: 121.2w (400w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Bel Aire 35
Spec Sheet IES Files
Specifications & Features
Housing: Heavy-Duty Die Cast Aluminum Housing & Front Frame, Integral Heat Sinking, Driver compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount with Two-Piece Swivel Bracket, Adjustable Slipfitter, Yoke, Mounting Arm Adaptor or Wall Mount Bracket. EasyLED LED: Aluminum Boards Wattage: 174w Array: 175.2w, System: 187w; (250-400w HID Equivalent) 262w Array: 262w, System: 286w; (400-1000w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Bel Aire 55
Spec Sheet IES Files
Specifications & Features
Housing: Heavy-Duty Die Cast Aluminum Housing & Front Frame, Integral Heat Sinking, Driver compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Tempered Clear Flat Glass Lens. Mounting Options: Mount with Adjustable Slipfitter. (Factory Installed) EasyLED LED: Aluminum Boards Wattage: 348w Array: 348w, System: 385.7w; (1000-1500w HID Equivalent) 524w Array: 524w, System: 568w; (1000-1500w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347-480V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Boca
Spec Sheet
Specifications & Features
Radiant LED: Conformal Coating LED light engine; CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electronic: Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz; 0-10V Dimmable Driver; Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: The housing is heavy cast aluminum, supporting solid aluminum support struts Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty
Boca 1
Spec Sheet IES Files
Specifications & Features
Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum housing with rings; Four uprights Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty
Boca 2
Spec Sheet IES Files
Specifications & Features
Light Engine: Radiant LED; CCT: Amber, LPS, 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum housing; Two uprights Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty
Bollard Retrofit Kit
Spec Sheet
Specifications & Features
The Bollard Retrofit Base Kit allows installation of new bollards to most existing bolt patterns without removal of existing bolts. Fits all CAV 11-19 bollards, both round and square
Bristol 1
Spec Sheet IES Files
Specifications & Features
Light Engine: Radiant LED, CCT: Amber, LPS (1800K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum upper housing & spun aluminum lower shade. The luminaire itself is held in place with a mechanical attachment & connected to the pole’s shaft with a cast aluminum hub fitter, welded to the arm & secured to the shaft with 3 set screws. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty
Bristol 2
Spec Sheet
Specifications & Features
Light Engine: Opti-FLUX LED, CCT: 27K, 3K, 4K, 5K Optical: Types III, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum spun shade with latch. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty
Button Eye Photo Control
Spec Sheet
Features:- Dusk-to-dawn control of outdoor lighting
- Floodlights and security lighting
- Ideal for LED fixtures totaling 1650 W @ 277 VAC
- Non-drifting silicon light sensor IR filtered for human eye response
- Zero-cross technology helps device withstand severe inrush current and extends relay life
- Exceeds 10,000 ON/OFF operations at full load to match life expectancy of LED fixtures
- All components meet 15-year life requirements
Calais
Spec Sheet
Specifications & Features
Light Engine: Radiant LED, CCT: Amber, LPS (1800K), 22K 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Spun aluminum shades (optional). Includes leveler for pendant mount. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty
Cape May 1
Spec Sheet
Specifications & Features
Light Engine: Radiant LED, CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: This fixture’s housing is made of cast aluminum which holds the clear globe; available in either acrylic or polycarbonate. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location; IP66 Warranty: 5 year Limited Warranty
Carlsbad 1
Spec Sheet IES Files
Finials & Capitals
Specifications & Features
Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty
Carlsbad 1 Pendant
Spec Sheet IES Files
Specifications & Features
Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types I, II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty
Carlsbad 2
Spec Sheet IES Files
Finials & Capitals
Specifications & Features
Light Engine: Radiant LED; CCT: 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty
Carlsbad 3
Spec Sheet IES Files
Finials & Capitals
Specifications & Features
Light Engine: Radiant LED; CCT: Amber, LPS (18K), 22K, 27K, 3K, 4K, 5K Optical: Types II, III, IV, V Electrical: 0-10V Electronic Dimmable Driver, 120-277V, 50/60Hz or 347/480V, 50/60 Hz; Surge protection Available Controls: Button Eye Photo Control; House Side Shield Housing: Cast aluminum cage, roof and 3” slip fitter Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings: ETL Listed to UL 1598 standard for wet location Warranty: 5 year Limited Warranty
Cast Base Covers
Spec Sheet
Specifications & Features
Housing: Dies cast aluminum OR A356 alloy sand cast aluminum, Stainless Steel Hardware. CBCR and CBCS include sets of inserts that allow use on 4” and 5” square or round A Base Poles. Finish: Textured Architectural powdercoat finish, baked to ensure maximum paint adhesion, hardness and durability. Pole Fit: Bases are designed to fit poles based on dimensions shown. Pole combinations shown are based on fit over anchor base on each type of pole.
CAV 014
Spec Sheet
Specifications & Features
Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty
CAV 102
Spec Sheet
Specifications & Features
Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty
CAV 11 & 12
Spec Sheet IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat, Dome or Pyramid Tops, Internal Driver Tray for Easy Maintenance. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Reflector: Reflective White UV-Stabilized Polycarbonate Cone Reflector Lens: Clear UV-Stabilized Polycarbonate or SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Lens. Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: Array: 23w, System: 27w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -20°C to +40°C Environment.
CAV 112
Spec Sheet
Specifications & Features
Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty
CAV 130
Spec Sheet
Specifications & Features
Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty
CAV 13R & 13S
Spec Sheet IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base, Flat Top, Sealed Driver Compartment. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate or SoftLED LumaLens Opal UV-Stabilized Polycarbonate Vandal-Resistant Inner Lens to Seal LED Array. Mounting Options: Mounting Kit with 8˝ Zinc-Plated Anchor Bolts, Included. EasyLED LED: Aluminum Boards Wattage: Array: 16.6w, System: 18.1w; (70w HID Equivalent) Array: 25w, System: 27.2w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
Cav 13W & 14W
Spec Sheet
IES Files - Cav 13 IES Files - Cav 14
Specifications & Features
Housing: Die Cast Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Flat Top, Sealed Driver Compartment. Photocell Adaptable. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear Inner Lens to Seal LED Array. Mounting Options: Mount over a 4″ Recessed Outlet Box. Radiant™ LED: Aluminum Boards Wattage: Array: 16.6w, System: 20.2w (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60H; Dimmable Driver Warranty: 5-Year Warranty for -40°C to +40°C Environment.
CAV 142
Spec Sheet
Specifications & Features
Radiant™ LED: Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical: Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty
CAV 15
Spec Sheet IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat Top. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP66 Sealed LED Compartment. Finish: Textured Architectural Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: 360° Light Distribution, 120° Shield or 180° Shield Lens: Clear Polycarbonate or LumaLens Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. Radiant LED: Aluminum Boards Wattage: 360° 17w Array: 16.6w, System: 18.9w 180° & 120° 16w Array: 15.5w, System: 18.5w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
CAV 15-W
Spec Sheet IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mount Easy-Hang Wall Bracket, Built-In Level, Sealed Driver Compartment. 360° Distribution, or 120° or 180° Shield. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750; IP66 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mount Over a 4˝ Recessed Outlet Box. EasyLED LED: Aluminum Boards Wattage: 360° Arrays: 12w & 16.6w, System: 12.9w & 18.9w 180° & 120° Arrays: 10w & 15.5w, System: 11.2w & 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Warranty: 5-Year Warranty for -40°C to +50°C Environment.
CAV 16
Spec Sheet IES Files
LPS CAV 16 Spec Sheet LPS IES Files
Specifications & Features
Housing: Formed 316L Stainless Steel Housing with Flush Mounting Base & Vandal-Resistant Screws, Domed Top, Internal Ballast Tray for Easy Maintenance. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Style: Specially Designed Cone Reflector or Internal Louvers Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards CCT: 3000K, 4000K, 5000K and LPS Replacement PC Amber LED Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment
CAV 17
Spec Sheet IES Files
LPS CAV 17 Spec Sheet LPS Cav 17 IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Domed Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: Clear Prismatic Borosilicate Glass Refractor, Specially Designed Cone Reflector or Internal Louvers Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards CCT: 3000K, 4000K, 5000K, LPS Replacement PC Amber Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
CAV 18
Spec Sheet IES Files
LPS CAV 18 Spec Sheet LPS IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: Clear Prismatic Borosilicate Glass Refractor, Specially Designed Cone Reflector or Internal Louvers Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards CCT: 3000K, 4000K, 5000K, LPS Replacement PC Amber LED Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
CAV 19
Spec Sheet IES Files
LPS CAV 19 Spec Sheet LPS IES Files
Specifications & Features
Housing: Extruded Aluminum Housing with Flush Mounting Base & Vandal-Resistant Screws, Flat Top, Internal Ballast Tray for Easy Maintenance. Bollards Can Be Cut to Custom Lengths Upon Request. Listing & Ratings: CSA: Listed for Wet Locations, ANSI/UL 1598, 8750 IP65 Sealed LED Compartment. Finish: Textured Architectural Bronze or Black Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request. Style: Clear Prismatic Borosilicate Glass Refractor, Specially Designed Cone Reflector or Internal Louvers Lens: Clear UV-Stabilized Polycarbonate Vandal-Resistant Lens Mounting Options: Mounting Kit with 8˝ Anchor Bolts, Included. EasyLED LED: Aluminum Boards CCT: 3000K, 4000K, 5000K, LPS Replacement PC Amber LED Wattage: Array: 14.5w, System: 17w; (70w HID Equivalent) Driver: Electronic Driver, 120-277V, 50/60Hz or 347V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps. Controls: Fixtures Ordered with Factory-Installed Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers. Warranty: 5-Year Warranty for -40°C to +40°C Environment.
CAV 193
Spec Sheet
Specifications & Features
Radiant™ LED (Lantern Top): Conformal Coating LED light engine • CCT: Amber, LPS, 2200, 2700, 3000, 4000, 5000K Optical (Lantern Top): Type II, III, IV, V Electrical: Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz • 0-10V Dimmable Driver • Surge Protection - surge protection device meets IEEE C62.41 2002 C High 10kA Controls: Button eye photo control Housing: Heavy gauge decorative cast aluminum. Finish: Super durable polyester powder coat finish over a chromate conversion coating. Custom finishes available, including patinas and all RAL colors. Listings & Ratings • ETL listed to UL 1598 standard for wet location Warranty: 5 year limited warranty
CAV 22
Spec Sheet
Specifications & Features
Radiant™ LED
- Conformal Coating LED light engine
- CCT: Amber, LPS (1800K), 2200K, 2700K, 3000K, 4000K, 5000K
- Static Colors Available - Contact Factory
- Types II, III, IV, & V
- Electronic Driver, 120-277V, 50/60Hz or 347/480V, 50/60Hz
- 0-10v Dimmable Driver
- Standard Surge Protection included (6kV lineline; 10k-V line-earth)
- Button Eye Photo Control (PC)
- House Side Shield (H)
- Super durable polyester powder coat finish.
- Custom finishes available, including patinas and all RAL colors
- ETL listed to UL 1598 standard for wet location • LED is IP66 Rated
- 5 year limited warranty
